Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Problem mounting TurboTwist spinner  (Read 1270 times)

0 Members and 1 Guest are viewing this topic.

lettuce

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1900
  • Last login:December 31, 2021, 01:46:10 pm
  • Make It So!
Problem mounting TurboTwist spinner
« on: May 29, 2006, 06:21:26 am »
Im having a slight problem mouinting my TurboTwist spinner. Im using 1/2" MDF for my CP, and the shaft on the spinner doesnt seem to be long enough to go through the MDF and attach the plastic top of the spinner over the MDF. How is the spinner top surpposed to sit on top of the CP, right flat to the CP or so you can see narrow bottom part of the spiner top aswell??
Logged

Fozzy The Bear

  • Handbags at dawn in here!!!
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1831
  • Last login:September 18, 2011, 11:29:59 am
  • It's Been One Of Those Days... Don't Ask!
Re: Problem mounting TurboTwist spinner
« Reply #1 on: May 29, 2006, 07:18:10 am »
It's designed for metal CP's ...... But you can rout the top surface of the panel to the depth of a mounting plate and mount the spinner on that, to get it to sit flush.

Best Regards,
Julian (Fozzy The Bear)
Logged
Most bottles and jars contain at least twenty-five percent recycled Pacman.
And research indicates that Space Invaders are strongly attracted to people who have recently eaten meat pies.

lettuce

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1900
  • Last login:December 31, 2021, 01:46:10 pm
  • Make It So!
Re: Problem mounting TurboTwist spinner
« Reply #2 on: May 29, 2006, 08:50:51 am »
Is there a mounting plate for the turbotwist??
Logged

Timoe

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1662
  • Last login:July 14, 2009, 09:50:12 am
  • Team-Oh-tAy-Oh
    • Rattlin' Trash
Re: Problem mounting TurboTwist spinner
« Reply #3 on: May 29, 2006, 09:45:05 am »
There are two(2) set screws on the weight of the turbo twist.  You will need an allen wrench to loosen them.


Loosen them and slide the shaft up to the height you need then re tighten them.
Logged

RandyT

  • Trade Count: (+14)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7024
  • Last login:September 10, 2025, 07:59:56 pm
  • Friends don't let friends hack keyboards.
    • GroovyGameGear.com
Re: Problem mounting TurboTwist spinner
« Reply #4 on: May 29, 2006, 11:00:00 am »
Quote from: Timoe on May 29, 2006, 09:45:05 am
There are two(2) set screws on the weight of the turbo twist.  You will need an allen wrench to loosen them.

CAUTION:  Only loosen the set screw nearest the knob. 

You can then adjust the length of the shaft to accomodate both metal and wood control panels.

RandyT
Logged
Pages: [1]
  
Go Up
« previous next »