Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: wiring perfect 360's into mame cab w/ jpac  (Read 3042 times)

0 Members and 1 Guest are viewing this topic.

mystikjoe

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
  • Last login:Never
  • I want to Build My Own Arcade Controls!!
wiring perfect 360's into mame cab w/ jpac
« on: April 14, 2002, 08:47:30 am »
i'm almost done all my wiring of my cabinet and my question is are perfect 360's able to be used with a jpac?  i'm assuming to power them i'll run them of the power supply.  for the ground on all the switches should i use the pc power supply or should i use the two negative outputs on the jpac.  also i want to wire a 4 way pac man controller in series with the perfect 360 does that pose any problems?  thanks for the help.
« Last Edit: December 31, 1969, 07:00:00 pm by 1026619200 »

Thenasty

  • Trade Count: (+17)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4419
  • Last login:Today at 01:40:35 pm
    • Thenasty's Arcademania Horizontal/Vertical monitor setup.
Re: wiring perfect 360's into mame cab w/ jpac
« Reply #1 on: April 14, 2002, 10:18:17 am »
I think you should use the 5v and ground from the Jpac/Ipac. For the 4-way stick being same connection of one of the 360's, its OK as long as no one touches the 360 while playing a 4-way game. To resolve this, u could put a switch for the ground between the 4-way and the 360 so one is only active at a time.
« Last Edit: December 31, 1969, 07:00:00 pm by 1026619200 »
Thenasty's Arcademania Horizontal/Vertical setup.
http://forum.arcadecontrols.com/index.php?topic=26696.0

Free VGA Breakout Cable
http://forum.arcadecontrols.com/index.php?topic=38228.0

Ultimate All in One Coin Mech write up (Make your own)
http://forum.arcadecontrols.com/index.php?topic=19200.0

mystikjoe

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
  • Last login:Never
  • I want to Build My Own Arcade Controls!!
Re: wiring perfect 360's into mame cab w/ jpac
« Reply #2 on: April 14, 2002, 10:56:59 am »
there isn't a 5v hookup on the jpac only a ground any other suggestions?
« Last Edit: December 31, 1969, 07:00:00 pm by 1026619200 »

johnpurs

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 75
  • Last login:April 26, 2022, 10:59:30 pm
    • John &ampamp; Mad's MAME2000 Cabinet
Re: wiring perfect 360's into mame cab w/ jpac
« Reply #3 on: April 14, 2002, 12:45:36 pm »
Quote
there isn't a 5v hookup on the jpac only a ground any other suggestions?


There is a 5 volt connection where you can plug in an LED Harness or an OptiPac. THat is what he is refering to. Definetly a good idea to use some switch to cut the ground when using the other joystick jus to be safe.
« Last Edit: December 31, 1969, 07:00:00 pm by 1026619200 »
MAME2K

Pins:Devil'sDare*Taxi*Meteor*Fireball 2*WC Soccer 94*WhiteWater*Catacomb*FunHouse*Nine Ball*Space Shuttle*Flight2000**SeaWitch*Centaur*Paragon*Big Game*F-14 Tomcat*

mystikjoe

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 6
  • Last login:Never
  • I want to Build My Own Arcade Controls!!
Re: wiring perfect 360's into mame cab w/ jpac
« Reply #4 on: April 14, 2002, 02:32:09 pm »
so i jump the power from the connector where the leds would plug in i understand this.  as far as the 360's do they work just like a normal controller.  do they output a negative or a positive.  i don't want to blow up the jpac took 4 weeks to get in.  i know i daisy chain the grounds to all the buttons and the 4 way pac man controller but i'm a little unsure of the 360.  thanks for the reply.
« Last Edit: December 31, 1969, 07:00:00 pm by 1026619200 »

Thenasty

  • Trade Count: (+17)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4419
  • Last login:Today at 01:40:35 pm
    • Thenasty's Arcademania Horizontal/Vertical monitor setup.
Re: wiring perfect 360's into mame cab w/ jpac
« Reply #5 on: April 14, 2002, 07:48:53 pm »
hook up your ground to all your joystick/buttons all in common. Then hook up the 5v in the 360's. Then each wire connect  to  Up, Down. Right, Left on your Jpac..thats it....The 5v being applied to the 360 so the LED/Sensor light gets powered and when you movie the stick it covers those 2 light and triggers the direction...
« Last Edit: December 31, 1969, 07:00:00 pm by 1026619200 »
Thenasty's Arcademania Horizontal/Vertical setup.
http://forum.arcadecontrols.com/index.php?topic=26696.0

Free VGA Breakout Cable
http://forum.arcadecontrols.com/index.php?topic=38228.0

Ultimate All in One Coin Mech write up (Make your own)
http://forum.arcadecontrols.com/index.php?topic=19200.0

Mario Pasamba

  • Guest
  • Trade Count: (0)
Re: wiring perfect 360's into mame cab w/ jpac
« Reply #6 on: April 15, 2002, 09:13:13 am »
[hijack]
I haven't heard from you about the hot rod and since you're not replying to my email I don't know how else to reach you.  Why can't you provide me with a tracking number if you claim to have already shipped my hot rod almost two weeks ago?
[/hijack]
« Last Edit: December 31, 1969, 07:00:00 pm by 1026619200 »