Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Ultimarc Question  (Read 834 times)

0 Members and 1 Guest are viewing this topic.

loremtr

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 21
  • Last login:May 19, 2007, 01:15:16 pm
  • Woo hoo..finally building a cabinet.
Ultimarc Question
« on: January 02, 2006, 04:17:18 pm »
Im using the ultimar setup program to confirm my button wiring.  Everything is working fine except the joysticks and P1B1. 
The joysticks are regstering that they are pushed in multiple directions...when the joysticks are being pushed.  Its almost like they are stuck...however I checked the microswitches and nothing is touching them.    Any ideas? 

jcrouse

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1027
  • Last login:January 09, 2010, 05:53:51 pm
    • CPViewer
Re: Ultimarc Question
« Reply #1 on: January 02, 2006, 04:25:01 pm »
Do you have the connectors on the correct lead on the switch. It sounds like you have the one lead switched between normally-open and normally-closed.

John

loremtr

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 21
  • Last login:May 19, 2007, 01:15:16 pm
  • Woo hoo..finally building a cabinet.
Re: Ultimarc Question
« Reply #2 on: January 02, 2006, 04:39:19 pm »
ok..joystick problem fixed....

Still have the P1B1 firing whenever I press up on joystick 1 though.