Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: slot cutter bit for t-molding  (Read 1613 times)

0 Members and 1 Guest are viewing this topic.

Nataq

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 189
  • Last login:October 21, 2023, 09:09:45 am
  • Arcade of the dead... now alive!
    • Arcade of the dead... now alive!
slot cutter bit for t-molding
« on: September 28, 2005, 11:57:12 am »
Wich ones of these would be the good one for cutting the t-molding groove ?


http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/bt_slot.html

the 3-wing 1/16 is what I need ?
« Last Edit: September 28, 2005, 12:00:48 pm by Nataq »
Logged

RetroACTIVE

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1429
  • Last login:January 28, 2024, 04:27:52 pm
  • Gramps
Re: slot cutter bit for t-molding
« Reply #1 on: September 28, 2005, 12:56:05 pm »
Depends upon how wide your t-molding is...

1/16" is the correct cutter for 3/4" or smaller t-molding and 5/64" is the correct cutter for 13/16" or wider t-molding...

following www.tmolding.com recommendations.
Logged
Happy Gaming!

Nataq

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 189
  • Last login:October 21, 2023, 09:09:45 am
  • Arcade of the dead... now alive!
    • Arcade of the dead... now alive!
Re: slot cutter bit for t-molding
« Reply #2 on: September 28, 2005, 01:24:36 pm »
I need 1/16. Im just wondering if this 1/16 bit on this page is really what I need :)
Logged

RetroACTIVE

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1429
  • Last login:January 28, 2024, 04:27:52 pm
  • Gramps
Re: slot cutter bit for t-molding
« Reply #3 on: September 28, 2005, 01:30:55 pm »
yup... just be sure to buy the whole thing if you don't already have a shank and bearing.
Logged
Happy Gaming!

Nataq

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 189
  • Last login:October 21, 2023, 09:09:45 am
  • Arcade of the dead... now alive!
    • Arcade of the dead... now alive!
Re: slot cutter bit for t-molding
« Reply #4 on: September 29, 2005, 11:31:58 am »
thanks :)
Logged
Pages: [1]
  
Go Up
« previous next »