Author Topic: Sydney Harbour Bridge Project - NEW PICS - (Read 12834 times)

Freeplay · « **on:** September 23, 2005, 05:11:58 am »

Here we Go............

I found this cab on a website... just screamming to be bought back to life.

Since I hate dance Arcade machines I will be tweaking a few things.

Stay posted

Quote

HaRuMaN · « **Reply #1 on:** September 23, 2005, 05:19:11 am »

What's a Bidge? And what happened to the dance pads?

turbopsi · « **Reply #2 on:** September 23, 2005, 06:25:07 am »

Would make a killer Jukebox !
Any plans / ideas yet??

ginno · « **Reply #3 on:** September 23, 2005, 09:22:41 am »

Going for the Swans tomorrow Freeplay?

TOK · « **Reply #4 on:** September 23, 2005, 02:36:07 pm »

Just wire it without the dance pads and leave it somewhere. Those fruity DDR players will put quarters in then become very confused.

nullb0y · « **Reply #5 on:** September 23, 2005, 04:13:42 pm »

i MUST HAVE IT!!!! lol

Freeplay · « **Reply #6 on:** September 23, 2005, 11:55:01 pm »

Yep...... A Jukebox without a doubt
With Killer Subs like that, its crying out too pump some tunes.

I'm just looking at Virtual Music Jukebox..... looks pretty good... any suggestions??

I'm also going to need one mother of a screen.
But with the speakers and neon tubes already in place I reckon I'm off too a good start.

nullb0y · « **Reply #7 on:** September 24, 2005, 01:21:42 am »

hey can i get those buttons from the front pannel off of you? ill pay you for them ^_^ i needf a set for my machine and are there any boards inside?

Freeplay · « **Reply #8 on:** September 25, 2005, 07:34:04 pm »

nullbOy ..... sorry.. I will need those for directional selection.
There were no boards inside, just a transformer and 3 5/12 volt power supplys.
But I will keep you posted if I change my mind.

I've been playing with VMJ over the weekend ( Awesome Program ).
I need to boost the sound, so I've pulled the amp out of my HiFi setup... (the missus is starting to scream already)

My trusty old amp pumps out the sound fine, so I'll need to find another amp,
but at least this saves me going down the 12 volt DC track.

I've got my eye on a 27" TVPC on ebay... 27inch with a VGA input.
It would be perfect..... so heres hoping someone doesn't bid over me.

I've also spotted a compaq EVO slimline PC on ebay... they look pretty small yet feature packed..... might just be the thing.

I placed my 21" computer screen in to show the size of this cab..... it looks like a mini screen dwarfed in this cab.... but at least its starting to look the par.

One of the sub woofer perspex covers and metal surounds were missing when I picked up the cab... so i'l spend the next few days making some of those.

nullb0y · « **Reply #9 on:** September 25, 2005, 07:47:57 pm »

those things have huge screens in the cade and those speakers are usually REALLY loud

Freeplay · « **Reply #10 on:** September 25, 2005, 08:14:36 pm »

Quote

Quote from: ginno on September 23, 2005, 09:22:41 am

Going for the Swans tomorrow Freeplay?

You Little beauty... the Swans have pulled it off..... pity I can't say the same about the eels.

nullb0y · « **Reply #11 on:** September 26, 2005, 09:22:08 pm »

aww just one set of buttons common :0)

Freeplay · « **Reply #12 on:** September 26, 2005, 11:06:26 pm »

o go on then... make me an offer for the 2 sets...
Gee... that would make me a Global Exporter...lol

Freeplay · « **Reply #13 on:** September 27, 2005, 10:36:24 pm »

I pickup the PCTV, I scored thru ebay........ The inbuilt vga connection is a the best feature i've seen on a tv yet. No hassles... just plug it in an bingo... 27 inches of pure bliss.

Sample pic shows it connected to my pc...... and it fits in the cabinet with 2mm to spare. It's as if it was custom made.

I've started to make the missing speaker surround, because it is made from metal it was a bit more work than I thought it was going to be.
Anyway I finally got it cut and nows its ready for a coat of black paint.

Next I will start to tackle the perspex covers for the speakers... so I'm off to Bunnings ( Australia's version of Home Depot )

Freeplay · « **Reply #14 on:** September 29, 2005, 06:04:59 pm »

Well, Bunnings was great fun, as usual I came home with a tonne of crap I really didn't need....lol

I was looking for some plexi to replace a missing speaker cover, the cab came with a cover on the left side, but missing on the right side.
There is a metal grill on the top cone of the speaker, but the metal grill is missing off the sub woofer on both sides. like the one pictured below.

I was on the hunt for some plexi, and some sort of drain covers to use as

Rook3 · « **Reply #15 on:** September 29, 2005, 06:17:20 pm »

Where did you get that cabinet from? Feel free to PM me if you don't want to say in public. The full size DDR cabs are impossible to find on their own. All I've seen in a "gutted" cabinet is the single player versions... and they suck.

Russ

nullb0y · « **Reply #16 on:** September 29, 2005, 06:28:12 pm »

pm sent for buttons if u want more let me know

Freeplay · « **Reply #17 on:** September 30, 2005, 04:13:32 am »

Quote from: Rook3 on September 29, 2005, 06:17:20 pm

Where did you get that cabinet from? The full size DDR cabs are impossible to find on their own. All I've seen in a "gutted" cabinet is the single player versions... and they suck.

Russ

Sorry Russ... I'm in Oz and here, we chop em up for firewood, or turn into juke boxes

nullb0y · « **Reply #18 on:** September 30, 2005, 10:02:02 am »

gah hes ignoring me lol

Rook3 · « **Reply #19 on:** September 30, 2005, 10:06:09 am »

You know, you can buy those buttons from Happ Controls pretty easily.

Russ

nullb0y · « **Reply #20 on:** September 30, 2005, 10:31:50 am »

happ wants quite a bit and i want used ones from an arcade machine lol

Freeplay · « **Reply #21 on:** September 30, 2005, 11:28:14 pm »

Quote from: nullb0y on September 30, 2005, 10:02:02 am

gah hes ignoring me lol

Nullboy... sorry not ignoring..... itd just thsn I'm in Australia.. your offer would not even cover the freight. ( I just didn't want to offend you ).

Anyway on with the building

nullb0y · « **Reply #22 on:** October 01, 2005, 12:31:30 am »

oh ok how much would shipping be do you think?

Rook3 · « **Reply #23 on:** October 01, 2005, 01:04:01 pm »

Quote

happ wants quite a bit and i want used ones from an arcade machine lol

BRAND NEW Buttons like you want would cost you $7 each from Happ's plus shipping.

International shipping could cost you upwards of $30 alone if you use Speedpost. Oh sure, you could go parcel post... and wait 4-8 WEEKS for them to arrive.

Have you searched Google or eBay for them? Sometimes others will have Happ parts for slightly less than Happ's cost.

Russ

nullb0y · « **Reply #24 on:** October 01, 2005, 05:40:52 pm »

happ is like 15 bucks a button (lit) and i found a guy on ebasy he will sell em for 15 for one of each but wants uber shipping

Rook3 · « **Reply #25 on:** October 01, 2005, 06:10:05 pm »

Quote

happ is like 15 bucks a button (lit) and i found a guy on ebasy he will sell em for 15 for one of each but wants uber shipping

http://www.happcontrols.com/pushbuttons/5700045x.htm

57-0004-53

digitalpackrat · « **Reply #26 on:** October 02, 2005, 11:32:56 am »

Cool project makin me want to build a jukebox player now. That is a sweet TV. could you post a link to the ebay auction or manufacturers website. who makes it and whats the model number? how much was it? What resolution can it do? I would like to put a better 27" TV in my cabinet. does it also have input for the yellow white and red cables also?

Freeplay · « **Reply #27 on:** October 03, 2005, 07:38:46 pm »

Quote from: digitalpackrat on October 02, 2005, 11:32:56 am

Cool project makin me want to build a jukebox player now. That is a sweet TV. could you post a link to the ebay auction or manufacturers website. who makes it and whats the model number?

The Make and model is CE PCTV that's it!
I couldn't find any info on the net anywhere, The guy I bought it off was the second owner, and he had no knowledge either.
It appears to be a dumb monitor mounted in a TV surround with a tuner and av componet packed inside.
Either way it's a beauty.. but if it ever breaks down I think I could probably kiss it goodbye.

nullb0y · « **Reply #28 on:** October 03, 2005, 08:19:06 pm »

thats really weird ive never heard such a thing

Rook3 · « **Reply #29 on:** October 04, 2005, 12:26:58 am »

Sounds sort of like the Gateway TV my friend has. That one's even bigger at 32".

Russ

Freeplay · « **Reply #30 on:** October 04, 2005, 03:28:22 am »

Quote from: nullb0y on October 03, 2005, 08:19:06 pm

that's really weird Ive never heard such a thing

I couldn't find anything... so I bought it sight unseen, but it sure made life easier.

I was sort of hoping too have had some feedback on jukebox software to use by now. I was going along the lines of VMJ, however SK Jukebox looks very similar.... but won't need as many operator buttons... so I may play with that for a while.

Freeplay · « **Reply #31 on:** October 07, 2005, 03:43:20 am »

Well... I havent really been doing much, but here's the update.

I installed my trusty old audio amp and computer. I couldn't believe how easy they slotted in. This also gave me a chance to connect the speakers and do a test drive.

Well, my first question was answered...yep plenty of audio grunt. Well enough to keep the neighbours complaining...lol

Next I will finish the dressing plates on the speaker fronts, and start to think about how I will do the control panel.

Keep rockin.......

Freeplay · « **Reply #32 on:** October 09, 2005, 06:33:29 pm »

Well, this weekend I started the CP.

Wow, talk about testing you mental ability.....

Bending perspex is a pain in the butt.... on to plan B

Freeplay · « **Reply #33 on:** October 17, 2005, 03:50:53 pm »

The perspex burnt, so it's on to plan c

nullb0y · « **Reply #34 on:** October 17, 2005, 05:08:06 pm »

perspex? wazat?

Rook3 · « **Reply #35 on:** October 17, 2005, 11:45:48 pm »

We in the USA call Perspex... Plexiglass.

Bones · « **Reply #36 on:** October 18, 2005, 03:13:02 am »

Quote from: Freeplay on October 17, 2005, 03:50:53 pm

The perspex burnt, so it's on to plan c

There is a huge amount of wrong terminologies used around here when discussing this material. Words like perspex are used generically when discussing plastic that is clear but for the purest they are vastly different.

Try using the material sold as Polycarbonate instead. Brand names for this stuff I have seen in Australia are Lexan, Macralon and Safeguard.

I guarantee the Mythbusters don't stand in front of Perspex when are are blowing cool stuff up.....

Freeplay · « **Reply #37 on:** October 18, 2005, 06:09:50 pm »

lol... thanks bones

I'm sure Adam and Jamie have perspex plates in there heads anyway ( Well, maybe not Jamie, but Adam must have.

As it was... I went to a sign guy ( friend ) to ask him how to bend it. He laughed when I show him my attempt, then he had some pretty green off cuts laying around. So CP panel is coming along.

thesmit · « **Reply #38 on:** November 08, 2005, 03:08:03 am »

Hi Free,
How did ya end up bending the perspex? With a specially designed perspex bender? ... or did ya find some other method?
Keen to know...

thanks
Smit

PS: I'm in Oz as well..... and I call it perspex... hehehe

Freeplay · « **Reply #39 on:** January 16, 2006, 09:09:43 pm »

I Finished this cab early december, and haven't had it home long enough to take any pictures........it keeps going from one mates place to the next.

I think I need to start another one, so I can have one at home...lol


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news