Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Another 49-way question  (Read 767 times)

0 Members and 1 Guest are viewing this topic.

fiscap

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 159
  • Last login:November 24, 2024, 03:30:36 pm
  • I dare ye enter... the dungeons of daggorath!!!
    • BYOAC blog
Another 49-way question
« on: September 08, 2005, 05:44:15 pm »
Does anyone know how much depth you need in your control panel in order to install a 49-way joystick? I checked the specifications on the Happ site and there are no dimensions provided.

RandyT

  • Trade Count: (+14)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7014
  • Last login:July 31, 2025, 01:58:29 pm
  • Friends don't let friends hack keyboards.
    • GroovyGameGear.com
Re: Another 49-way question
« Reply #1 on: September 08, 2005, 09:32:45 pm »
You're going to want at least 3.25" below the bottom surface of the panel.  If you intend to ever replace the shaft with one of our ball-tops, go 3.5"

If you want to use floyd's rotary adapter, you'll need quite a bit more.

RandyT