Coin Co Reject Button Help...

[hitandrun]

I am trying to find the easiest way to get the 25c insert for my coin reject button to be lined up with the other.

[darktemp]

It's not difficult to remove the assembly.  Just remove the 4 nuts on the inside corners and the whole thing comes off.  From there It's pretty simple to figure out.

[Ken Layton]

Actually just take the coin chute out of it's holder, take those two nylock nuts off (1/4" nutdriver), and slide the coin trough backwards. Watch out for the reject button spring so it doesn't fly out. The button just slides out now.

[hitandrun]

Thanks for the help!  I will give this a try this evening when I get home.