Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: New CP layout with usb ports  (Read 1141 times)

0 Members and 1 Guest are viewing this topic.

BarontheFirst

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 243
  • Last login:April 11, 2023, 07:42:07 pm
  • Locked out of the gameroom again!
New CP layout with usb ports
« on: June 23, 2005, 09:44:42 am »
Was looking into building a new panel and adding USB ports. Also keeping them kinda hidden. Now my cab sits in a corner so the area of the cp I want to put them is kinds hidden. I also went as far as to add the mouse or t-ball buttons to the player one and player 2 controls. Buttons will be the same color and no stand out difference. This is also just the frame the top will be the usual shape and have a bit of overhang. So please through some feedback or ideas. Don't want to build a new CP every year! :)


Not to scale!!!!
Logged

Franco

  • Guest
  • Trade Count: (0)
Re: New CP layout with usb ports
« Reply #1 on: June 23, 2005, 09:54:08 am »
You may want to move the 4-way and/or the trackball slightly so you dont hit your hand on the 4way.

USBs are a good idea, I intend to add a panel flush to the lower front of mine with a USB hub, 2 n64 ports and two ps2 ports at some point.
Logged

BarontheFirst

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 243
  • Last login:April 11, 2023, 07:42:07 pm
  • Locked out of the gameroom again!
Re: New CP layout with usb ports
« Reply #2 on: June 25, 2005, 02:18:20 pm »
Just wondering but were I want to place the usb ports on the back side of my CP if anyone has also added there main power switch and pc power switch? If so should I just place a 4 gang electrical box there? I want to keep usb on both sides so it looks like I need about 6" overhang on each side. Again any tips or ideas would be great TY in advance all.
Logged
Pages: [1]
  
Go Up
« previous next »