Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Can you change the led bulb or color on the IPAC LED Harness?  (Read 3111 times)

0 Members and 1 Guest are viewing this topic.

Timoe

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1662
  • Last login:July 14, 2009, 09:50:12 am
  • Team-Oh-tAy-Oh
    • Rattlin' Trash
Can you change the led bulb or color on the IPAC LED Harness?
« on: June 02, 2005, 03:02:43 pm »

I'm thinking of making a CP with the IPAC LEDs someday but I dont like the three color scheme.  Does anyone know if you can change the bulbs on these things and if so, what type bulb to use?
Logged

CJK

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 263
  • Last login:February 03, 2024, 03:30:12 am
  • All your ROM are belong to us!
Re: Can you change the led bulb or color on the IPAC LED Harness?
« Reply #1 on: June 02, 2005, 06:35:51 pm »
Why not save yourself the trouble and get Gamecab's LED driver board? You can choose your own LEDs, plus you get the ability to drive several more without having to worry about resistors, etc.

-- Chris
Logged
Underway: Joey's Arcade

Tiger-Heli

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5447
  • Last login:January 03, 2018, 02:19:23 pm
  • Ron Howard? . . . er, I mean . . . Run, Coward!!!
    • Tiger-Heli
Re: Can you change the led bulb or color on the IPAC LED Harness?
« Reply #2 on: June 04, 2005, 08:10:08 am »
Or just hard-wire a different color LED to the harness.

BTW, you want LEDs, not bulbs, and the LEDs it comes with use either a separate or intergral resistor, so the replacement LEDs will need a resistor to make them compatible with a 5V input.
Logged
It's not what you take when you leave this world behind you, it's what you leave behind you when you go. - R. Travis.
When all is said and done, generally much more is SAID than DONE.

chrisindfw

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 262
  • Last login:May 09, 2020, 05:57:34 pm
  • I drank what?
Re: Can you change the led bulb or color on the IPAC LED Harness?
« Reply #3 on: June 04, 2005, 01:37:33 pm »
Simply pull the bulb out of the harness and re-insert a new one. Make sure the voltage is the same.
Logged

Tiger-Heli

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5447
  • Last login:January 03, 2018, 02:19:23 pm
  • Ron Howard? . . . er, I mean . . . Run, Coward!!!
    • Tiger-Heli
Re: Can you change the led bulb or color on the IPAC LED Harness?
« Reply #4 on: June 04, 2005, 01:44:11 pm »
Quote from: chrisindfw on June 04, 2005, 01:37:33 pm
Simply pull the bulb out of the harness and re-insert a new one. Make sure the voltage is the same.
They're not bulbs, they're LEDs and I suspect you have to desolder/resolder, not pull out and re-insert.
Logged
It's not what you take when you leave this world behind you, it's what you leave behind you when you go. - R. Travis.
When all is said and done, generally much more is SAID than DONE.

chrisindfw

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 262
  • Last login:May 09, 2020, 05:57:34 pm
  • I drank what?
Re: Can you change the led bulb or color on the IPAC LED Harness?
« Reply #5 on: June 04, 2005, 02:11:47 pm »
Actually not. I just got my harness in the mail. You can simply pull off the LED from the connector and then add a new one. Just make sure you know which is the + and -.

Logged

Timoe

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1662
  • Last login:July 14, 2009, 09:50:12 am
  • Team-Oh-tAy-Oh
    • Rattlin' Trash
Re: Can you change the led bulb or color on the IPAC LED Harness?
« Reply #6 on: June 04, 2005, 05:57:38 pm »
What type LED is it?  Andy from Ultimarc mentioned something about an internal resistor.  Has anyone here tried this?

Part of me wants this harness just for the conical led holder.

Anyway if anyone can help me with where to find this type LED that would be great.
Logged

Tiger-Heli

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5447
  • Last login:January 03, 2018, 02:19:23 pm
  • Ron Howard? . . . er, I mean . . . Run, Coward!!!
    • Tiger-Heli
Re: Can you change the led bulb or color on the IPAC LED Harness?
« Reply #7 on: June 06, 2005, 03:19:10 pm »
Quote from: timoe on June 04, 2005, 05:57:38 pm
What type LED is it?  Andy from Ultimarc mentioned something about an internal resistor.  Has anyone here tried this?

Part of me wants this harness just for the conical led holder.

Anyway if anyone can help me with where to find this type LED that would be great.
I think he means the resistor is internal to the harness, but you could try a 2.1V LED, worst case is it will burn out too quickly.  That or chrisindfw might have more info.
Logged
It's not what you take when you leave this world behind you, it's what you leave behind you when you go. - R. Travis.
When all is said and done, generally much more is SAID than DONE.

RandyT

  • Trade Count: (+14)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7018
  • Last login:Today at 10:50:24 am
  • Friends don't let friends hack keyboards.
    • GroovyGameGear.com
Re: Can you change the led bulb or color on the IPAC LED Harness?
« Reply #8 on: June 06, 2005, 08:41:28 pm »
Be careful what you do there.  Contact Ultimarc to find out what the LED voltage and resistor values are.

Unless you use a driver board like the one from Gamecab, you will be driving the LED directly from the microcontroller.

And you really don't want to pull too much current through the microcontroller.


RandyT
Logged

Timoe

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1662
  • Last login:July 14, 2009, 09:50:12 am
  • Team-Oh-tAy-Oh
    • Rattlin' Trash
Re: Can you change the led bulb or color on the IPAC LED Harness?
« Reply #9 on: June 06, 2005, 09:08:47 pm »
Maybe if GroovyGameGear could sell me a Blue Versa Ball replacement stick for my Happ supers I wouldn't need no stinkin lights.


?
Logged
Pages: [1]
  
Go Up
« previous next »