Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Moving fully working cab  (Read 1301 times)

0 Members and 1 Guest are viewing this topic.

Wenis

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 77
  • Last login:June 02, 2022, 07:42:17 am
Moving fully working cab
« on: May 02, 2005, 06:17:03 pm »
I just bought a fully working arcade cab off ebay. I was wondering if it would be okay to lay it down in the bed of my truck or should i just leave it sitting upright. It is a full size upright cab.

Thanks
Like Burt Reynolds!!

paigeoliver

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10994
  • Last login:July 06, 2024, 08:43:49 pm
  • Awesome face!
Re: Moving fully working cab
« Reply #1 on: May 02, 2005, 06:23:51 pm »
Lay it down, just make sure everything inside is secure first. (Make sure monitor is bolted down, and the boards and power supply are secure).

Only stand them up if you have to for space reasons, they transport much better on their backs.
Acceptance of Zen philosophy is marred slightly by the nagging thought that if all things are interconnected, then all things must be in some way involved with Pauly Shore.

Lilwolf

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4945
  • Last login:July 31, 2022, 10:26:34 pm
Re: Moving fully working cab
« Reply #2 on: May 02, 2005, 08:15:37 pm »
Also remember... Sometimes the CRT are not screwed in (and stay in with gravity).  Heard of people moving their new cab... and the crt pops out and fall down... boom

Target

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 15
  • Last login:February 28, 2008, 01:47:47 pm
  • ...call the police...
Re: Moving fully working cab
« Reply #3 on: May 02, 2005, 09:17:15 pm »
OMG where was this forum back in 89 when i bought my zaxxon at auction and we tipped it over and ...of course PCB wasnt mounted....

it didnt like that at all..

if only i had checked to see what was mounted and what wasnt...

sigh...

needless to say at 17, internet not being what it is now and not knowing crud about arcade machines, it didnt recover.

thanks for bringing back the horrible horrible memories.....

Wenis

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 77
  • Last login:June 02, 2022, 07:42:17 am
Re: Moving fully working cab
« Reply #4 on: May 02, 2005, 11:34:40 pm »
thanks for the info paigeoliver & lilwolf, sorry about the memories target.

Like Burt Reynolds!!