Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: What to add to a Happ order  (Read 1117 times)

0 Members and 1 Guest are viewing this topic.

eli curtz

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 26
  • Last login:May 26, 2004, 02:51:09 pm
What to add to a Happ order
« on: March 09, 2004, 11:57:40 pm »
Hi all,

I'm thinking I'll get one of the "high lip" 3" trackballs from Happ this month while they are on sale and I'm curious if there is anything else I should throw into my order. Are there any particular things you used that you found you could only get from them, or that you assumed you could do without and then changed your mind and had to order seperately? I'll be getting joysticks from Ultimarc along with my encoder as soon as Andy gets the rest of the ball-tops in <waits semi-patiently> so I don't need those.

thanks,
eli
Look. This... is all a mistake. I'm just a compound interest program. I work at a savings and loan! I can't play these video games!

SirPeale

  • Green Mountain Man
  • Global Moderator
  • Trade Count: (+23)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 12963
  • Last login:August 04, 2023, 09:51:57 am
  • Arcade Repair in New England
    • Arcade Game and Other Coin-Op Projects
Re:What to add to a Happ order
« Reply #1 on: March 10, 2004, 12:00:05 am »
I've got a 3" Betson highlip trackball for sale for $39.  Cleaned, lubed and tested.

eli curtz

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 26
  • Last login:May 26, 2004, 02:51:09 pm
Re:What to add to a Happ order
« Reply #2 on: March 10, 2004, 12:12:40 am »
Yeah,

I've considered getting one from you as well. I thought I might have a little more flexibility with a high lipped one since I'm not sure what I'll be covering my CP with (or even if I'll go with wood or metal at this point.)
Look. This... is all a mistake. I'm just a compound interest program. I work at a savings and loan! I can't play these video games!

TalkingOctopus

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1722
  • Last login:Today at 03:48:02 am
  • @!#?@!
    • My Arcade
Re:What to add to a Happ order
« Reply #3 on: March 10, 2004, 12:50:22 am »
Black bolts/nuts or a mounting plate to mount your trackball??  I found black bolts to be useful and I don't know of may places to get them.   Pushbuttons? Push button wrench?  T-molding?  Monitor bezel?  I dunno, what do you need for your cab?  Those were some suggestions I had.

You can take

dirt

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 723
  • Last login:October 30, 2024, 08:36:38 pm
Re:What to add to a Happ order
« Reply #4 on: March 10, 2004, 12:56:52 am »
iwould say marquee retainers.

dirt
WANTED: NINTENDO CABINETS WORKING OR NOT

Jabba

  • D-Hutt
  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1643
  • Last login:November 16, 2020, 02:17:20 pm
  • I find your lack of faith...disturbing...
Re:What to add to a Happ order
« Reply #5 on: March 10, 2004, 07:00:08 am »
How about Happ Vinyl...Competition Joysticks, Coin Door (makesure you also order 14V #161 light bulbs AND coin mechs for over/under door...
« Last Edit: March 10, 2004, 07:01:41 am by jabba »
Vids:  Home built MAME machine, Crystal Castles. Arkanoid
Pins:   Williams Aztec (working). Stern Nugent (not working...yet), Williams Phoenix (major not working, missing parts.... )

Always on the lookout for buying 90's game with Ramps that need work...

KrispyTheClown

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 12
  • Last login:March 09, 2004, 08:36:07 am
  • I'm a llama!
Re:What to add to a Happ order
« Reply #6 on: March 10, 2004, 09:25:55 am »
Also, one of those Pushbutton Wrenches are good to have around.  You can get by without one, but they make tightening down your pushbuttons so much easier.  Get the one called the 'Illuminated Pushbutton Wrench' - it has one end that handles regular buttons.  Their website shows the current price at $2.40.

nipsmg

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1753
  • Last login:July 30, 2025, 12:06:21 pm
  • ROONEY!! ERRGH!!
    • Arcadia
Re:What to add to a Happ order
« Reply #7 on: March 10, 2004, 09:28:10 am »
Get the mounting plate... Can't stress that enough.  The high lip trackball comes with a spacer that you can use even if you decide to use a metal control panel, or no covering for your wood control panel that still makes it flush.

Maybe a translucent trackball? :-D  
--NipsMG

Tiger-Heli

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5447
  • Last login:January 03, 2018, 02:19:23 pm
  • Ron Howard? . . . er, I mean . . . Run, Coward!!!
    • Tiger-Heli
Re:What to add to a Happ order
« Reply #8 on: March 10, 2004, 10:39:10 am »
I would get everything from www.therealbobroberts.com except Happ rotary joysticks or Perfect 360 joysticks, which Bob doesn't sell.
It's not what you take when you leave this world behind you, it's what you leave behind you when you go. - R. Travis.
When all is said and done, generally much more is SAID than DONE.