Can anyone post a link to the wiring harness I would need to replace the original wiring harness for the joysticks and buttons for a dedicated MK 2 arcade game?
According to the KLOV entry about this cabinet,
Mortal Kombat II uses a standard JAMMA harness on connector P1.
- Any standard JAMMA harness will be fine as long as it has the -5v lines for audio
and you check that pins 25, 26, c, and d are not connected to be sure that you don't get a mis-labeled "CHAMMA" (Chinese JAMMA) harness.
MKII also uses a 4 wire "kick" harness on connector P5 with "Low Punch" and "Low Kick" for P1 and P2.
Here are the pinouts for MKII wiring.
https://www.arcade-museum.com/pinouts-game/8756.htmlScott