Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Mounting Sanwa JLF-TP-8YT from the Bottom without Routing?  (Read 1167 times)

0 Members and 1 Guest are viewing this topic.

Richardgregory

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 360
  • Last login:November 17, 2021, 01:15:10 pm
  • I want to build my own arcade controls!
Mounting Sanwa JLF-TP-8YT from the Bottom without Routing?
« on: March 04, 2021, 10:08:33 am »
I'm using 3/4" plywood, and my thought was to bottom mount the Sanwa JLF-TP-8YT without routing - I know, I know, with a 34mm joystick shaft it'll leave just 15mm when mounted, so it'll be less than 10-15mm below the 'standard/normal'.  However, thinking back to the Galaga Cab, the joystick also has a very short shaft....so thinking maybe I could get away mounting this way?  What is the disadvantage of having a joystick shaft shorter than the norm?


javeryh

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7961
  • Last login:August 01, 2025, 10:06:09 am
Re: Mounting Sanwa JLF-TP-8YT from the Bottom without Routing?
« Reply #1 on: March 04, 2021, 10:43:42 am »
Just personal preference.

Mike A

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5906
  • Last login:August 01, 2025, 09:29:01 am
  • This plan is foolproof
Re: Mounting Sanwa JLF-TP-8YT from the Bottom without Routing?
« Reply #2 on: March 04, 2021, 11:55:01 am »
As men we try to make the shaft look longer not shorter.

You might run into the stick hitting the edges of the hole.

javeryh

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7961
  • Last login:August 01, 2025, 10:06:09 am
Re: Mounting Sanwa JLF-TP-8YT from the Bottom without Routing?
« Reply #3 on: March 04, 2021, 12:28:23 pm »
As men we try to make the shaft look longer not shorter.

You might run into the stick hitting the edges of the hole.

Both great points.  Make sure your shaft clears the hole or it will limit everyone's fun.