Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: primer + laminate a good idea?  (Read 349 times)

0 Members and 1 Guest are viewing this topic.

vertexguy

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 116
  • Last login:Today at 11:40:16 am
  • ...but this one goes to 11.
    • forum.arcadecontrols.com/index.php/topic,161694.0.html
    • V E R T E X G U Y - The Online Portfolio of Chris Kline
primer + laminate a good idea?
« on: September 29, 2020, 07:43:10 pm »
I'm trying to learn more about laminate options and see if it makes sense for my build.  Arroyo's already given me most of the details I need, but there's a few things yet to discover.

One major consideration is that I'm gonna go with Baltic Birch ply, and have a house with high humidity swings (15-60%).  As such I thought it might be a good idea to prime the wood first to better fully protect it from the humidity swings.   However I'm not sure if that compromises the laminate bond any, given that it would be adhering to primer instead of wood.   Since the laminate route isn't cheap, I'd like to be sure this thing lasts.  Has anyone had experience with this that can offer some advice?  All the tutorials I've seen so far speak to gluing the laminate directly to bare wood.  :dunno



bperkins01

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 796
  • Last login:Today at 12:17:42 pm
  • Plenty of skills.. gaining experience..
Re: primer + laminate a good idea?
« Reply #1 on: September 29, 2020, 09:39:01 pm »
If you are worried about humidity - priming will not hurt - it may help.
The issue you are trying to protect against is cupping of the plywood.
Plywood wants to be in equilibrium on both sides when it comes to moisture.

If you laminate one side - and leave the other side open to humidity - it *may* expand a bit and cause the panel to bow a bit. 
There are a couple of things you can do..
Get plywood with more plys.  More plys = more cross grain glue lines = less ability to expand and warp.  Cabinet grade has up to 11 plys..  its solid as a rock..  and costs a fortune.
Baltic birch is pretty good stuff and it tends to have a lot of plys.

You could prime both sides and then laminate..  I think this is overkill.

If it were me in your situation..  I would just paint the exposed side and laminate the side you want to laminate.
Both sides will now be protected from humidity = can't easily absorb moisture = remains stable.
HTH



My Arcade Cabinet Build and other projects here:
Centipede, Joust, Joust Cocktail, Asteroids, Galaga, Ms. Pacman Cabaret, Defender, Space Invaders Cocktail
https://bperkins.wordpress.com/