Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Flynn's Arcade Build - Story/Writeup/Etc...  (Read 4449 times)

0 Members and 1 Guest are viewing this topic.

ffingers

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 60
  • Last login:February 19, 2020, 10:57:01 am
Flynn's Arcade Build - Story/Writeup/Etc...
« on: February 19, 2020, 10:17:58 am »
Well....where do I even begin. I guess I'll start with a picture. This is Flynn's Arcade (I know...I know) :dunno It's about 95% complete. Still have a few things to finish but it's mostly done. I have been a part of BYOAC for probably 10+ years but only recently did I actually start my build. I have learned SO much from this forum and it was the start of this journey for me. I figured I needed to give back in some way and go through what I did, what I did wrong (spolier:a lot), what I used, why I did it, the process etc. I know build threads help me get ideas and helped direct me to where I ended up.

This will be a LOT of writing from me and I'm going to do my best to break it down into sections and make a menu etc so you can ignore the backstory if you want and jump straight to a certain section. I only ask that you bear with me as I type all this up as it will likely take at minimum a week or so to get all this info together.

With that being said, here are a few pictures to show where it's at and what I'll be talking about.






Video of the frontend in action:

« Last Edit: February 19, 2020, 10:23:02 am by ffingers »
Logged
Flynn's Arcade - it's HERE! Build and writeup!

ffingers

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 60
  • Last login:February 19, 2020, 10:57:01 am
Re: Flynn's Arcade Build - Story/Writeup/Etc...
« Reply #1 on: February 19, 2020, 10:26:50 am »
[Reserved for future write-up]
Logged
Flynn's Arcade - it's HERE! Build and writeup!

ffingers

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 60
  • Last login:February 19, 2020, 10:57:01 am
Re: Flynn's Arcade Build - Story/Writeup/Etc...
« Reply #2 on: February 19, 2020, 10:27:05 am »
[Reserved for future write-up]
Logged
Flynn's Arcade - it's HERE! Build and writeup!

ffingers

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 60
  • Last login:February 19, 2020, 10:57:01 am
Re: Flynn's Arcade Build - Story/Writeup/Etc...
« Reply #3 on: February 19, 2020, 10:27:19 am »
[Reserved for future write-up]
Logged
Flynn's Arcade - it's HERE! Build and writeup!

ffingers

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 60
  • Last login:February 19, 2020, 10:57:01 am
Re: Flynn's Arcade Build - Story/Writeup/Etc...
« Reply #4 on: February 19, 2020, 10:27:28 am »
[Reserved for future write-up]
Logged
Flynn's Arcade - it's HERE! Build and writeup!

ffingers

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 60
  • Last login:February 19, 2020, 10:57:01 am
Re: Flynn's Arcade Build - Story/Writeup/Etc...
« Reply #5 on: February 19, 2020, 10:27:43 am »
[Reserved for future write-up]
Logged
Flynn's Arcade - it's HERE! Build and writeup!

ffingers

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 60
  • Last login:February 19, 2020, 10:57:01 am
Re: Flynn's Arcade Build - Story/Writeup/Etc...
« Reply #6 on: February 19, 2020, 10:28:02 am »
[Reserved for future write-up]
Logged
Flynn's Arcade - it's HERE! Build and writeup!

wp34

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4794
  • Last login:April 10, 2022, 09:48:19 pm
Re: Flynn's Arcade Build - Story/Writeup/Etc...
« Reply #7 on: February 19, 2020, 01:52:56 pm »
That bezel looks like it belongs on a CRT.  Did you make it yourself?  I like the look.
Logged

javeryh

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7995
  • Last login:Yesterday at 03:55:38 pm
Re: Flynn's Arcade Build - Story/Writeup/Etc...
« Reply #8 on: February 20, 2020, 09:24:38 am »
Looks like a really well-made cab.  Are you the one that came up with that CP shape?  I see it all over the place so people must really like it.
Logged

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19964
  • Last login:Yesterday at 01:01:52 am
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: Flynn's Arcade Build - Story/Writeup/Etc...
« Reply #9 on: February 20, 2020, 09:57:01 am »
Quote from: javeryh on February 20, 2020, 09:24:38 am
Looks like a really well-made cab.  Are you the one that came up with that CP shape?  I see it all over the place so people must really like it.

No, Jarrett designed it but never actually built it.
Logged
***Build what you dig, bro. Build what you dig.***

Mike A

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5914
  • Last login:Yesterday at 02:59:21 pm
  • This plan is foolproof
Re: Flynn's Arcade Build - Story/Writeup/Etc...
« Reply #10 on: February 20, 2020, 10:26:04 am »
The Klingons use that CP design in ritual combat.
Logged
Pages: [1]
  
Go Up
« previous next »