Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Trying to fix a ticking WG 25K5109 Standard/Medium Resolution (switchable) U5000  (Read 317 times)

0 Members and 1 Guest are viewing this topic.

Anton

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 5
  • Last login:January 12, 2020, 05:48:19 pm
  • Motorcycle pinball arcade outboards neon jukebox
Hello all,

Trying to fix a ticking WG 25K5109. I suppose this is a U5000 chassis since it is Standard/Medium Resolution (switchable)

Recapped the chassis. still ticking.

Hooked up a 120v lightbulb to the unsoldered w159 jumper to check the powersupply. Result: faint pulsing glow in the bulb.
Read in posts to check C117. Problem: the schematic drawing shows 22uF 63v but the parts lists shows 10uF 50v. 

What value should I take? Any other recomendations?

Thanks!

Anton

SirPeale

  • Green Mountain Man
  • Global Moderator
  • Trade Count: (+23)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 12951
  • Last login:February 03, 2020, 04:31:27 pm
  • Arcade Repair in New England
    • Arcade Game and Other Coin-Op Projects
Is it otherwise working? Or, is it dead other than the ticking?

If it's the latter, it's going into shutdown.

lilshawn

  • Trade Count: (+3)
  • Full Member
  • ***
  • Online Online
  • Posts: 6525
  • Last login:Today at 07:48:42 pm
  • I break stuff...then fix it...sometimes
possible shorted D106 /a/b

did you replace ALL the caps, or just some?

bad or backwards C115 C120 if one is backwards, replace it... don't just flip it around.