How to Interface SNK LS30 Joysticks in the Year 2019

[ZaneMn]

Hello all,

It's been many years since I have on this board but I am back in need of help.

I have two LS30 joysticks I need to interface with my PC.

I was using the Rotary Interface from Ultimarc but it no longer works and it seams I can no longer order it from Ultimarc.

Are there any other solutions?

Thanks!

[processedmeat]

I'm using this for my rotary stick setup

https://groovygamegear.com/webstore/index.php?main_page=product_info&cPath=76_81&products_id=234

[PL1]

I was using the Rotary Interface from Ultimarc but it no longer works and it seams I can no longer order it from Ultimarc.

Are there any other solutions?

- Ultimarc U-HID or U-Hid Nano.  (four diodes per stick, wire them like this)

- GGG GP-Wiz40 with Rotary Support. (ECO or MAX)

- KADE miniArcade 2.0 firmware, if you'd like an inexpensive way to "roll-your-own".
-- One MattairTech MT-DB-U4, Teensy 2.0, or Arduino Micro AVR will handle both sticks.
-- You won't be able to use an Arduino Pro Micro for both sticks because port C7 (Rot. 2B) isn't connected to a pin on the board.
-- Rotary stick wiring details are on page 9 of the User Guide.


Scott