Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Gold Leaf Button Question  (Read 1858 times)

0 Members and 1 Guest are viewing this topic.

JRChristenson

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 76
  • Last login:August 28, 2020, 05:29:39 pm
Gold Leaf Button Question
« on: March 02, 2019, 11:42:32 am »
If anyone has an Ultimarc gold leaf button handy I was wondering what the measurement is from the bottom of the actual button to the bottom of the entire thing. For example on this Happ button that measurement is 2 1/4". Thanks.
Logged

JDFan

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3448
  • Last login:March 03, 2025, 10:29:54 am
  • I want to build my own arcade controls!
Re: Gold Leaf Button Question
« Reply #1 on: March 02, 2019, 12:04:37 pm »
IF measuring for a reason like the bottom of the cab being there - you might want to redo your Happ measurement - On them the Microswitch adds more depth than your 2 1/4" measure shows - ( I know cause I had to cut out part of the bottom panel of my build when it would not fit with the microswitch in place !!   :banghead: )
« Last Edit: March 02, 2019, 12:38:50 pm by JDFan »
Logged

JRChristenson

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 76
  • Last login:August 28, 2020, 05:29:39 pm
Re: Gold Leaf Button Question
« Reply #2 on: March 02, 2019, 12:10:54 pm »
Yeah I know but the gold leaf buttons have the microswitch integrated.
Logged

Drnick

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1642
  • Last login:June 21, 2024, 03:32:31 pm
  • Plodding Through Life
Re: Gold Leaf Button Question
« Reply #3 on: March 02, 2019, 12:54:35 pm »
https://www.arcadeworlduk.com/products/awuk-gold-leaf-style-convex-arcade-button.html  (Says same as Goldleaf but with convex buttons) only other goldleaf are the ultimarc gold leaf on there that I saw.
Logged

PL1

  • Global Moderator
  • Trade Count: (+1)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 9687
  • Last login:Today at 02:21:33 am
  • Designated spam hunter
Re: Gold Leaf Button Question
« Reply #4 on: March 02, 2019, 01:09:58 pm »
Quote from: JRChristenson on March 02, 2019, 11:42:32 am
If anyone has an Ultimarc gold leaf button handy I was wondering what the measurement is from the bottom of the actual button to the bottom of the entire thing.
Bottom of bezel to bottom of button body is 1.318". (33.44mm)

Regular QDs will extend below the button body.

IL and Goldleaf buttons installed on 3/4" MDF:



Scott
Logged
Pages: [1]
  
Go Up
« previous next »