Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Non-interactive start up  (Read 697 times)

0 Members and 1 Guest are viewing this topic.

jokerz4fun

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 33
  • Last login:May 28, 2019, 09:03:41 am
  • Im surprised I haven't electrocuted myself yet.
Non-interactive start up
« on: November 04, 2018, 09:11:11 am »
Hey guys. I just started a new Megatouch ion project and when it boots it hangs at entering noninteractive startup. I've tried different hard drives, memory, and I O boards. And I still have the same issue any ideas? Is this bios related? I did log into the BIOS at startup and everything seems to be set to normal default. Motherboard is Asus A7N8X-LA

mahkeymike

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 548
  • Last login:Today at 01:41:19 pm
Re: Non-interactive start up
« Reply #1 on: November 05, 2018, 08:38:21 pm »
Looks like its hanging right before the sensor and hardware checks. If i had to guess faulty Motherboard. Check to see if there is any capacitors that are swelling.

orizzle

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 156
  • Last login:June 03, 2019, 11:25:45 am
  • I want to build my own arcade controls!
Re: Non-interactive start up
« Reply #2 on: November 07, 2018, 08:42:42 am »
"Cannot enable port 1, maybe the usb cable is bad"

Never seen that, but I'm guessing something connected to the motherboard or the mobo itself is holding it up.

jokerz4fun

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 33
  • Last login:May 28, 2019, 09:03:41 am
  • Im surprised I haven't electrocuted myself yet.
Re: Non-interactive start up
« Reply #3 on: November 07, 2018, 10:49:07 am »
I worked on it last night and believe it or not it was the USB cable. I swapped it out and it booted right up. Just need to figure some issues out with the io board and I should be all set! thank you guys for all the help I really do appreciate it.