Thanks snakezone for the offer... I may reach out eventually.
I updated the plans for the Radar Scope flat front and the Heli Fire. I am not sure really sure how I should judge these. The plans are basically a standard Nintendo cabinet with the correct measurements for the side panels and other components. Thanks to KLOVer MikeHoss1414 for taking the measurements. With that said, the internal structure for mounting the "TV" is not represented in the drawings. There is a line representing the approximate placement on the front edge of the TV cabinet / monitor shroud. I am not sure how relevant this placement is outside of authenticity.
I believe the drawings will allow for the creation of a Nintendo cabinet that will allow for the marquee, control panel, etc... to fit, and the cabinet will look authentic, but the individual components would not be interchangeable between the drawing below and an original cabinet e.g. is the coin door hole the same between this cabinet and a classic Nintendo (DK style) cabinet... not a clue. I am not sure I would call it a tribute cab, since the original measurements were referenced.
I also have a set of plans I am trying to get verified for a Gauntlet at the moment. I also have a set of plans to verify for a tapper. If I can get these verified, I will get them posted shortly.
Thanks
Brian