Author Topic: Arcade Cabinet Website www.classicarcadecabinets.com (Read 16646 times)

bdn103 · « **on:** July 20, 2015, 07:21:59 am »

Hello,

I have been a long time "lurker"... but this is my first post here. A few months back I started a website where I have been posting cabinet measurements. I strongly believe that this information needs to preserved, much like the artwork. The website if fairly crude, short on information, and I am sure it is riddled with spelling and grammatical errors.... but it is a start. I hope to continue to grow it over the next few year. If anyone has any feedback or suggestions (or even drawings), please let me know.

A liittle background...
I have been in the arcade collecting hobby is 1995. About 2 years ago I built a CNC machine for hobbyist purposes.... and I have cut a few cabinets since then. The CNC is a hobby for me that I use in my limited spare time.

Thanks
Brian

vwalbridge · « **Reply #1 on:** July 20, 2015, 10:26:38 am »

I'm sure you have heard of jakobud.com The cabinet plans on his page seem pretty good. Someone with more knowledge than me could comment on how accurate they are. (I have personally used his DK and Q*bert plans and have been happy) However, it sounds like you are going for 100% accuracy and easy transition to a wood CNC machine so that is nice.

I checked out your site and I'd like to offer a suggestion:

Make the plans available in pdf and/or jpg. Most common average Joes are not going to be able (or even want) to deal with .dxf or .crv file.

Good collection so far, hope it keeps growing.

bdn103 · « **Reply #2 on:** July 21, 2015, 10:42:54 pm »

This week, plans were added for Gravitar, Black Widow, and Space Duel.

Next up is a Quantum build with custom drawings and tracing a Rockola cab (Nibbler).

dmckean · « **Reply #3 on:** July 22, 2015, 12:02:10 am »

Quote from: vwalbridge on July 20, 2015, 10:26:38 am

I checked out your site and I'd like to offer a suggestion:

Make the plans available in pdf and/or jpg. Most common average Joes are not going to be able (or even want) to deal with .dxf or .crv file.

+1

mgb · « **Reply #4 on:** July 22, 2015, 08:18:45 am »

Hello and welcome.

Thanks for your contribution to the hobby.
Another source of measurements and all that is helpful.

I also agree that having the plans in PDF would be even more helpful.

Keep up the good work and if there is anyway that this community can help in that effort, don't hesitate to ask.

bdn103 · « **Reply #5 on:** July 22, 2015, 08:56:14 am »

Are the PDFs desired because they contain the vectors, or are PDFs desired to have measurements listed?

The concern is that while many of the machines have a lot of straight lines, many of the transitions are very gradual and difficult to document with curve and arc measurements as you would see on an engineering diagram. Can you point me towards an example of what would be good? I am assuming you are referencing similar to jakobud's drawings.

dmckean · « **Reply #6 on:** July 31, 2015, 01:13:35 pm »

Quote from: bdn103 on July 22, 2015, 08:56:14 am

Are the PDFs desired because they contain the vectors, or are PDFs desired to have measurements listed?

The concern is that while many of the machines have a lot of straight lines, many of the transitions are very gradual and difficult to document with curve and arc measurements as you would see on an engineering diagram. Can you point me towards an example of what would be good? I am assuming you are referencing similar to jakobud's drawings.

We want them for measurements and we understand all this. The way most people cut cabs here is using circular saw or table saw for the rough cuts, then using a jigsaw to get things close and then using a file and sander to get the angles the best they can. Then the second panel is cut using the first as a template with a router and a flush trim bit. We really don't need nearest millimeter accuracy, just something that's close enough. PDF is a great format because everyone can open them and read them.

vwalbridge · « **Reply #7 on:** July 31, 2015, 01:28:22 pm »

Quote

We want them for measurements and we understand all this. The way most people cut cabs here is using circular saw or table saw for the rough cuts, then using a jigsaw to get things close and then using a file and sander to get the angles the best they can. Then the second panel is cut using the first as a template with a router and a flush trim bit. We really don't need nearest millimeter accuracy, just something that's close enough. PDF is a great format because everyone can open them and read them.

+1 I don't even need a drawing for a cab that has square corners and straight lines. Just measurements are fine. Angles don't even matter because I can just measure from each edge to a center point and connect the dots.

As for cabinets that have long sweeping curves (like DK) most guys are just having a 1:1 drawing printed at Staples or Kinkos. Then cut out the drawing and trace it on the wood.

bdn103 · « **Reply #8 on:** September 01, 2015, 08:42:39 pm »

I have added 1:1 PDFs for all of the cabinet side panels. I have also added PDFs for some of the more difficult parts to cut as well. Hope this helps.

Thanks

stuzza · « **Reply #9 on:** September 02, 2015, 07:26:36 am »

Quote from: bdn103 on September 01, 2015, 08:42:39 pm

I have added 1:1 PDFs for all of the cabinet side panels. I have also added PDFs for some of the more difficult parts to cut as well. Hope this helps.

Thanks

Great website! Thanks for putting in the effort to get some detailed plans. This should help a lot of people. The CNC files are particulary helpful and hard to find online, so thanks again.

bdn103 · « **Reply #10 on:** October 13, 2015, 11:51:24 am »

Recently added Taito slanted top cabinet plans (Jungle Hunt style) and Reactor plans.

Thanks

bdn103 · « **Reply #11 on:** November 04, 2015, 12:29:12 pm »

Added plans for Killer Instinct /KI2 to include control panels.

Thanks

www.classicarcadecabinets.com

menace · « **Reply #12 on:** November 07, 2015, 07:20:48 am »

Missile command--Its not 100% and the distances are measured to sharp corners so you would have to radius them yourself--but it gets you in the very near ball park..I'm so going to start building these--I love this shape...

Nice job on the website and thanks for making the plans available--I have a dynamo HS-5 somewhere too..

bdn103 · « **Reply #13 on:** December 08, 2015, 03:03:45 pm »

I added plans for Crystal Castles and Agent X. Also added so reference pictures of the cabinet to help with assembly.

Menace, I have a set Missile Command plans that I have started on. Hope to add them to the site soon.

Thanks
Brian

Www.classicarcadecabinets.com

ChanceKJ · « **Reply #14 on:** December 08, 2015, 05:46:41 pm »

bdn103 · « **Reply #15 on:** December 09, 2015, 04:25:04 pm »

Thanks for all of the Nintendo cab information. I have updated the website with the new information for the additional Nintendo cabinets.

Thanks
Brian

ChanceKJ · « **Reply #16 on:** December 09, 2015, 04:39:30 pm »

Rick · « **Reply #17 on:** December 13, 2015, 04:58:10 pm »

Quote from: vwalbridge on July 20, 2015, 10:26:38 am

Make the plans available in pdf and/or jpg. Most common average Joes are not going to be able (or even want) to deal with .dxf or .crv file.

-1

A lot of people are interested in DXF files, as they are more easily able to have a professional CNC shop recreate the actual dimensions, with little issue. There are a lot of great local shops, if you look hard enough, and not everybody who wants a near-perfect recreation wants to deal with making mistakes with manual tools. (I know on my original project, I had to recreate numerous parts many, many times over, whenever I made mistakes, or when I had an issue with the quality of the product after the fact.)

I really like the site, and would recommend if you are planning on providing PDF's, please do not stop providing DXF files as well.

bdn103 · « **Reply #18 on:** December 17, 2015, 02:49:50 pm »

Quote from: Rick on December 13, 2015, 04:58:10 pm

Quote from: vwalbridge on July 20, 2015, 10:26:38 am
Make the plans available in pdf and/or jpg. Most common average Joes are not going to be able (or even want) to deal with .dxf or .crv file.

-1

A lot of people are interested in DXF files, as they are more easily able to have a professional CNC shop recreate the actual dimensions, with little issue. There are a lot of great local shops, if you look hard enough, and not everybody who wants a near-perfect recreation wants to deal with making mistakes with manual tools. (I know on my original project, I had to recreate numerous parts many, many times over, whenever I made mistakes, or when I had an issue with the quality of the product after the fact.)

I really like the site, and would recommend if you are planning on providing PDF's, please do not stop providing DXF files as well.

I have been adding printable drawings of all of the side panels and difficult to cut components. I have tried to do some dimensioning of the cabinets, but it takes a lot of time and get confusing / difficult to put measurements on a curve that translates well to wood working tools.

In celebration for the weekend, I posted plans for the Star Wars / Empire Strikes Back uprights.

Thank you
Brian

bdn103 · « **Reply #19 on:** December 28, 2015, 02:57:29 pm »

Added plans for a Ms. Pac cabaret and Robotron 2084 (which shares the cabinet with the straight front version of Joust).

Thanks
Brian

bdn103 · « **Reply #20 on:** January 05, 2016, 11:22:27 pm »

Plans were added for the straight top Taito "classic" cabinet. It was used for a bunch of games to include Polaris and Stratovox.

Thanks
Brian

Www..classicarcadecabinets.com

bdn103 · « **Reply #21 on:** January 23, 2016, 06:04:50 pm »

Added plans for a Mario Bros. Widebody cabinet. Taito trimline plans were added a few days ago as well.

Thanks
Brian

bdn103 · « **Reply #22 on:** January 24, 2016, 12:47:48 am »

Also added plans for TMNT and other 4 player Konami cabs with updated control panels / control boxes.

Thanks
Brian

bdn103 · « **Reply #23 on:** February 11, 2016, 08:10:31 am »

Plans added for Dragon's Lair.

Thanks
Brian

vwalbridge · « **Reply #24 on:** February 11, 2016, 10:33:57 am »

I'm very impressed. You have a great collection going! Very generous of you to share your work with the community.

bdn103 · « **Reply #25 on:** February 11, 2016, 08:38:17 pm »

Quote from: vwalbridge on February 11, 2016, 10:33:57 am

I'm very impressed. You have a great collection going! Very generous of you to share your work with the community.

Thank you. The site hasn't been up a full year yet and I am amazed at how much progress has been made. I was hoping for 6-10 plans by now.

Brian

Slippyblade · « **Reply #26 on:** February 11, 2016, 09:06:20 pm »

I'm feeling stupid. I can't figure out how to actually get anything from the website. I see a list of "Recent Updates" but that's pretty much it. Nothing is clickable, I can't figure out how to DL any of the plans...

acme64 · « **Reply #27 on:** February 11, 2016, 09:15:13 pm »

Quote from: Slippyblade on February 11, 2016, 09:06:20 pm

I'm feeling stupid. I can't figure out how to actually get anything from the website. I see a list of "Recent Updates" but that's pretty much it. Nothing is clickable, I can't figure out how to DL any of the plans...

the layout caught me too at first. Hover over the grey menu at the top of the page, a drop down with all the options will appear

Slippyblade · « **Reply #28 on:** February 11, 2016, 09:19:47 pm »

Got it! The hover isn't working when viewed through PHProxy, which I use when at work. Checked it through my tablet and wow - tons of good info there! Thanks for pointing it out.

acme64 · « **Reply #29 on:** February 16, 2016, 09:34:31 pm »

small layout suggestion. you should probably move the Key image lower down the page, or swap it with the model photo when available. everytime i click a cab i look at that and think...that's not it...

bdn103 · « **Reply #30 on:** February 17, 2016, 05:06:36 pm »

Quote from: acme64 on February 16, 2016, 09:34:31 pm

small layout suggestion. you should probably move the Key image lower down the page, or swap it with the model photo when available. everytime i click a cab i look at that and think...that's not it...

I agree the site needs a re-work. It is the plan over the next few weeks to get things cleaned up and a little more presentable (including the content and all of the spelling / grammar). It has grown a lot more then I had expected this first year, so many of the areas that I said were "good enough" to get things started never got revisited and fixed. I am not happy with how the menu system works and menus moving off screen... so like I said, it needs some work. I am a little embarrassed of the site, but I honestly don't have patience for additional IT stuff when I get home from work, so unfortunately the site will continue to be "quick and dirty" and not a polished gem that it could be.... but the content will continue to grow.

Thanks
Brian

ChanceKJ · « **Reply #31 on:** February 17, 2016, 06:18:20 pm »

vwalbridge · « **Reply #32 on:** February 17, 2016, 06:26:51 pm »

Quote from: ChanceKJ on February 17, 2016, 06:18:20 pm

Pre-Classic Nintendo cab

Speaking of Nintendo cabs, this would be a cool one to have plans for:

(Note how upright that vertical monitor is)

*Photo courtesy of mikehoss1414 on KLOV.

His FS thread

bdn103 · « **Reply #33 on:** February 17, 2016, 07:27:56 pm »

Thanks Chance. I've never seen a Sheriff before...definitely a rare opportunity.

Vwalbridge- I have already reached out to Mike Hoss and he was kind enough to take a pile of pictures and measurements of the cabinet. I should have it updated shortly.

On the Nintendo theme, I have someone local allowing me to trace their DK cabaret when the pick up their freshly cut Taito cabinet.

Thanks
Brian

ChanceKJ · « **Reply #34 on:** February 18, 2016, 07:09:10 am »

snakezone · « **Reply #35 on:** February 18, 2016, 07:35:07 am »

Quote from: bdn103 on February 17, 2016, 05:06:36 pm

Quote from: acme64 on February 16, 2016, 09:34:31 pm
small layout suggestion. you should probably move the Key image lower down the page, or swap it with the model photo when available. everytime i click a cab i look at that and think...that's not it...

I agree the site needs a re-work. It is the plan over the next few weeks to get things cleaned up and a little more presentable (including the content and all of the spelling / grammar). It has grown a lot more then I had expected this first year, so many of the areas that I said were "good enough" to get things started never got revisited and fixed. I am not happy with how the menu system works and menus moving off screen... so like I said, it needs some work. I am a little embarrassed of the site, but I honestly don't have patience for additional IT stuff when I get home from work, so unfortunately the site will continue to be "quick and dirty" and not a polished gem that it could be.... but the content will continue to grow.

Thanks
Brian

Hi Brian, The site looks very nice, if you need any help, send me a pm, i work as web developer

Enviado desde mi XT1032 mediante Tapatalk

bdn103 · « **Reply #36 on:** February 18, 2016, 12:31:34 pm »

Thanks snakezone for the offer... I may reach out eventually.

I updated the plans for the Radar Scope flat front and the Heli Fire. I am not sure really sure how I should judge these. The plans are basically a standard Nintendo cabinet with the correct measurements for the side panels and other components. Thanks to KLOVer MikeHoss1414 for taking the measurements. With that said, the internal structure for mounting the "TV" is not represented in the drawings. There is a line representing the approximate placement on the front edge of the TV cabinet / monitor shroud. I am not sure how relevant this placement is outside of authenticity.

I believe the drawings will allow for the creation of a Nintendo cabinet that will allow for the marquee, control panel, etc... to fit, and the cabinet will look authentic, but the individual components would not be interchangeable between the drawing below and an original cabinet e.g. is the coin door hole the same between this cabinet and a classic Nintendo (DK style) cabinet... not a clue. I am not sure I would call it a tribute cab, since the original measurements were referenced.

I also have a set of plans I am trying to get verified for a Gauntlet at the moment. I also have a set of plans to verify for a tapper. If I can get these verified, I will get them posted shortly.

Thanks

Brian

ChanceKJ · « **Reply #37 on:** February 18, 2016, 05:50:38 pm »

Slippyblade · « **Reply #38 on:** February 18, 2016, 05:59:29 pm »

I've been looking for Pac-Man cabaret plans for ages Every time someone asks about that cab, they get linked to the Ms Pac cabaret... which is a totally different cab. The Pac-Man cabaret is the same as Rally-X.

johnrt · « **Reply #39 on:** February 18, 2016, 06:04:49 pm »

Quote from: ChanceKJ on February 18, 2016, 07:09:10 am

I will KILL for a nintendo cabaret.

...Get those plans up and we'll make a small series of videos for it on the youtube channel.

+1

I have actually been thinking about building one. Gimme those plans!!!!!!

bdn103 · « **Reply #40 on:** February 18, 2016, 10:22:48 pm »

Quote from: Slippyblade on February 18, 2016, 05:59:29 pm

I've been looking for Pac-Man cabaret plans for ages Every time someone asks about that cab, they get linked to the Ms Pac cabaret... which is a totally different cab. The Pac-Man cabaret is the same as Rally-X.

Hope to start on a Pacman cabaret in the next few weeks after magfest. (I need to pick it up). I'll update here as things here as plans get completed. The Wizard of Wor cabaret is almost done....so hopefully in the next couple of days.

Thanks
Brian

bdn103 · « **Reply #41 on:** February 21, 2016, 12:11:44 am »

After a day at Magfest, I finished the Wizard of Wor cabaret plans tonight and got them posted to the site.

Thank you
Brian

bdn103 · « **Reply #42 on:** March 06, 2016, 10:33:49 am »

Added plans for a traditional Joust style cabinet.

Thanks
Brian

dmckean · « **Reply #43 on:** March 10, 2016, 12:07:48 am »

Quote from: bdn103 on January 05, 2016, 11:22:27 pm

Plans were added for the straight top Taito "classic" cabinet. It was used for a bunch of games to include Polaris and Stratovox.

Glad to see this one go up, thanks so much for all your effort on this.

bdn103 · « **Reply #44 on:** March 19, 2016, 07:20:18 pm »

Added plans for an upright Discs of Tron (UDOT).

Thanks
Brian

bdn103 · « **Reply #45 on:** April 01, 2016, 08:29:03 am »

Started a Facebook page (link is on the website). I've had multiple requests for this. I plan on posting more regular updates there. I will continue to post here as new plans get done.

I am assembling a bunch of Konami 4p cabs (Simpsons style) and I am working on a howto page. It is about half done. Should be complete some time this weekend.

I am also about 3/4 done tracing a Nichibutsu cab (Frisky Tom / Moon shuttle style) and hope to have that posted soon as well.

Thanks
Brian

bdn103 · « **Reply #46 on:** April 07, 2016, 11:08:05 am »

Added plans for the Nichibutsu cabinet. This cabinet is shared with Frisky Tom, Moon Shuttle, Radical Radial, and possibly others.

Thanks
Brian

bdn103 · « **Reply #47 on:** April 19, 2016, 06:30:34 pm »

Added plans for a dynamo HS-1 style cabinet and a Tron cabinet.

Thanks
Brian

Slippyblade · « **Reply #48 on:** April 19, 2016, 06:31:28 pm »

Yay! I was just asking in another thread about HS-1 plans.

bdn103 · « **Reply #49 on:** April 27, 2016, 03:35:25 pm »

Plans were added for Centipede, and Baby Pac-Man / Granny and the Gators.

Thanks
Brian

bdn103 · « **Reply #50 on:** May 10, 2016, 02:29:13 pm »

Posted plans for a Venture cabinet (same as Pepper II, Hard Hat, and Teeter Torture). Please note the plans have not been spot checked (by a third party) for accuracy by referencing a donor cabinet. I do not know how accurate the plans are.

http://www.classicarcadecabinets.com/venture.html

Thank you
Brian

bdn103 · « **Reply #51 on:** May 15, 2016, 06:26:36 pm »

Added a bunch of plans. All of these need verification in some form and weren't traced by me.

Dedicated Space Ace
Tapper
Atari System 1 (Indiana Jones, Peter Pack Rat, Road Blaster, Road Runner)
Q*Bert

Thanks
Brian

bdn103 · « **Reply #52 on:** May 23, 2016, 08:53:07 pm »

The following plans were added.......
Star wars cockpit
Donkey Kong cabaret
Splat! Cocktail
Major Havoc
Defender
Missile Command
Gauntlet
Joust cocktail
Quantum
Cliff Hanger
Moon Patrol
Satan's Hollow
Fire Fox / I Robot
Asteroids / Lunar Lander

Working on a Mouse Trap. Hope to have it traced and posted soon.

Thanks
Brian

DarthBS · « **Reply #53 on:** May 23, 2016, 09:29:06 pm »

Nice site

bdn103 · « **Reply #54 on:** June 04, 2016, 10:58:49 pm »

Updated the Taito slant top plans.

Finishing up the MouseTrap plans. I also had a Donkey Kong Cabaret dropped off this past week. Hope to have these updated soon as well.

Thanks
Brian

bdn103 · « **Reply #55 on:** June 17, 2016, 07:13:55 am »

Plans were added for Berzerk, Frenzy, and Environmental Discs of Tron. All of the plans are unverified.

Also, I have a pile of plans posted to the website that have not been verified (they have the Warning banners). Anyone who has one of these cabinets and is willing to check a few measurements for me, it would be greatly appreciated.

Thanks
Brian

wp34 · « **Reply #56 on:** June 17, 2016, 02:24:10 pm »

Thanks again for doing this. I've got my eye on your Taito and Stargate Cabaret plans for future projects.

bdn103 · « **Reply #57 on:** June 17, 2016, 03:02:56 pm »

Quote from: wp34 on June 17, 2016, 02:24:10 pm

Thanks again for doing this. I've got my eye on your Taito and Stargate Cabaret plans for future projects.

I have not cut a Stargate cabinet, but the Taito cabinet turns out well.

A few weeks ago dungeonmastr (from KLOV) provided a set of plans for a Nintendo cabaret. I just got a donor cabinet dropped off this past weekend, so I will update the plans if any changes were needed.... but dungeonmastr's plans are already posted on the website.

Thanks
Brian

wp34 · « **Reply #58 on:** June 17, 2016, 03:25:13 pm »

That Taito looks real nice.

I'm planning to cut the Stargate manually from your plans but may (shudder) try a local CNC for the Taito. You just make it too easy.

Slippyblade · « **Reply #59 on:** June 17, 2016, 03:29:43 pm »

I'm enrolling at my local TechShop soon and they have a 4'x8' CNC ShopBot that takes VCarve Pro files... So I plan on tossing several of these plans on there. Should be a TON of fun!

bdn103 · « **Reply #60 on:** June 17, 2016, 04:59:05 pm »

Quote from: Slippyblade on June 17, 2016, 03:29:43 pm

I'm enrolling at my local TechShop soon and they have a 4'x8' CNC ShopBot that takes VCarve Pro files... So I plan on tossing several of these plans on there. Should be a TON of fun!

When you get ready to use the ShopBot, reach out to me through the website and I can try and help you get started. The CRV files are not 100% push button....but are close. Feeds,speeds, and depths of cuts still need to be added.

Thanks
Brian

Slippyblade · « **Reply #61 on:** June 17, 2016, 05:08:24 pm »

Quote from: bdn103 on June 17, 2016, 04:59:05 pm

Quote from: Slippyblade on June 17, 2016, 03:29:43 pm
I'm enrolling at my local TechShop soon and they have a 4'x8' CNC ShopBot that takes VCarve Pro files... So I plan on tossing several of these plans on there. Should be a TON of fun!

When you get ready to use the ShopBot, reach out to me through the website and I can try and help you get started. The CRV files are not 100% push button....but are close. Feeds,speeds, and depths of cuts still need to be added.

They require an in-shop class on the machine and software before they let you use it, so converting a cab file would be good class work. So the files that are on the site are just tool paths then?

bdn103 · « **Reply #62 on:** June 17, 2016, 05:31:14 pm »

They require an in-shop class on the machine and software before they let you use it, so converting a cab file would be good class work. So the files that are on the site are just tool paths then?
[/quote]

The CRV files contain the vectors and the object groupings. The tool paths have been removed.
I struggled over the tool path issue for a long time.....before deciding to remove them. For the most part, they are not that difficult to get added for a CNCer with some experience. The concern is that the tool paths are machine specific.
Based on how the table is configured, the x and y axis could be switched, wrong tool cutter selected, or the cut depths incorrect. For example, my table uses a spoil board and when I cut material and I cut at a depth of .82" and into the spoil board. If I had a nice ShopBot with a vacuum table, I would be cutting at a depth of .74" to save the vacuum table. My tool paths would destroy the vacuum table.
My table is 7hp, others may be 10hp or 2.2hp. Wrong feeds and speeds can break the bits or maybe the machine.

Like I said, once you get close to being ready to cut, I can help you through the details.

Thanks
Brian

bdn103 · « **Reply #63 on:** October 24, 2016, 12:33:30 pm »

Sorry for the Necro-bump... I haven't logged in for a wile.

If any of you are using the plans (like cj138's Star Wars build), please le me know. I would love to add some pictures if you are willing and I can make any adjustments to the plans as needed from problems you encounter.

Currently working on an updated Simpsons cabinet drawing (new drawing from scratch to replace what is on the website). I am almost done and should have it posted this week. Current list of cabinet plans (many are duplicates) include the following.

1 10 Yard Fight
2 1943 (HS-1)
3 Agent X *
4 Alpine Ski - Taito
5 Armor Attack *
6 Asteroids *
7 Baby Pacman *
8 Battlezone Cabaret
9 Bezerk
10 Bionic Comando (HS-1)
11 Black Widow *
12 Bubbles cabaret*
13 Bucky O'Hare
14 Burger Time *
15 Carrier Airwing (HS-1)
16 Centipede Cabaret
17 Centipede Upright *
18 Cliff Hanger *
19 Colony 7 Trimline *
20 Colony 7 Upright *
21 Cosimic Chasm *
22 Crazy Balloon *
23 Crazy Climber Trimline
24 Crime Fighters
25 Crossbow
26 Crystal Castles *
27 Defender *
28 Discs of Tron Environmental
29 Discs of Tron Upright
30 Dig Dug Cabaret
31 Donkey Kong cabaret *
32 Donkey Kong *
33 Donkey Kong II (D2K) *
34 Donkey Kong 3 *
35 Donkey Kong Jr, *
36 Dragon's Lair *
37 Double Dragon (HS-1)
38 Dynamo HS-1 style *
39 Electric Yo Yo - Taito
40 Elevator Action - Taito
41 Empire Strikes Back *
42 Eyes
43 Fantasy
44 Final Fight (HS-1)
45 Fire Fox
46 Food Fight *
47 Forgotten Worlds (HS-1)
48 Frenzy
49 Frisky Tom *
50 Front Line Trimline *
51 Front Line Upright
52 Galaga Cocktail *
53 Galaga Upright *
54 Galivan *
55 Gauntlet *
56 Gouls n Ghosts
57 G.I. Joe
58 Granny and the Gators *
59 Gravitar *
60 Great 1000 Mile Rally (HS-1)
61 Guerrilla War (HS-1)
62 Hard Hat *
63 Heli Fire *
64 I, Robot *
65 Ikari Warriors
66 Indian Battle *
67 Indiana Jones *
68 Joust cocktail *
69 Joust curved Front (most common) *
70 Joust straight front *
71 Jump Bug
72 Jungle Hunt Trimline*
73 Jungle Hunt upright
74 Jungle King Trimline *
75 Jungle King - Taito
76 Killer Instinct
77 Killer Instinct 2
78 Kram - Taito
79 Krull *
Liberator
80 Lunar Lander
81 Lunar Rescue *
82 Lupin III *
83 Hagic Swork (HS-1)
84 Magmax *
85 Major Havoc *
86 Make Trax cabaret *
87 Marble Madness *
88 Mario Bros. (classic cabinet)*
89 Mario Bros. widebody *
90 Missile Command *
91 Moon Patrol *
92 Moon Shuttle Trimline *
93 Moon Shuttle upright - Nichibutsu *
94 Moon Shuttle upright - Taito *
95 Mortal Kombat II *
96 Mortal Kombat III *
97 Mortal Kombat 4 *
98 Mouse Trap *
99 Ms. Pacman cabaret *
100 Ms. Pacman upright *
101 Nibbler
102 P.O.W. (HS-1)
103 Pepper II *
104 Peter Pack Rat *
105 Phoenix Trimline *
106 Pioneer Balloon
107 Pirate Pete
108 Polaris Trimline *
109 Polaris Upright *
110 Popeye *
111 Pirate Pete - Taito
112 Punk Shot
113 Q*Bert *
114 Quantum *
115 Qit Trimline *
116 Qix Upright
117 Radar Scope classic cabinet *
118 Radar Scope older flat front *
119 Radical Radial *
120 Reactor *
121 Road Blasters *
122 Road Runner *
123 Robotron 2084 mini *
124 Robotron 2084 Upright *
125 Rug Rats *
126 Satan's Hollow *
127 Seicross *
128 Simpsons
129 Sky Skipper cabaret
130 Sky Skipper Classic
131 Space Ace *
132 Space Chaser *
133 Space Cyclone *
134 Space Duel *
135 Space Demon cabaret
136 Space Dungeon - Taito
137 Space Invaders Trimline *
138 Space Seeker *
139 Splat! cocktail
140 Star Castle *
141 StarGate mini
142 Sunset Riders
143 Star Wars Cockpit *
144 Star Wars Upright *
145 Straight Flush *
146 Stratovox *
147 Street Fighter (HS-1)
148 Street Fighter 2 (HS-1)
149 Strider (HS-1)
150 Tapper *
151 Track & Field *
152 Teenage Mutant Ninja Turtles (TMNT)
153 Teeter Torture *
154 Tempest Cabaret
155 Terra Cresta *
156 Tron *
157 Turtles in Time
158 UFO Robo Dangar *
159 Ultimate Mortal Kombat 3*
160 U.N. Squadron (HS-1)
161 Vendetta
162 Venture *
163 Victory Road (HS-1)
164 Water Ski - Taito
165 War Gods *
166 Warp Warp
167 Willow
168 Wild West Cowboys of Moo Mesa
169 Wild Western - Taito
170 Wizard of Wor cabaret *
171 Wrestle Mania *
172 X-Men
173 Zarzon Trimline *
174 Zarzon *
175 Zoo Keeper - Taito

Thanks
Brian


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Arcade Cabinet Website www.classicarcadecabinets.com (Read 16646 times)

johnrt