Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: where to find or have overlays done ??  (Read 823 times)

0 Members and 1 Guest are viewing this topic.

dashingw

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 99
  • Last login:February 01, 2025, 06:47:39 pm
  • Miss my 80's
where to find or have overlays done ??
« on: February 22, 2015, 02:23:23 pm »
I find myself adding a couple more holes onto my control panel as I want to add a Trackball, spinner and a joystick grip with trigger
As of right now my control panel is 1" thick wood and smooth painted black. I obviously am not going to find an overlay that is going to match button and joystick holes that are in it now, so I am looking for something universal with no placement for buttons/joysticks to cover my panel if I decide I don't just want paint and then I can cut to fit. I'm thinking black and green with some sort of design to it but that's not set in stone. Just had light/bright green in mind as I was thinking of using that color for the T-moulding for the rest of the cabinet. Any helpful suggestions would be appreciated on where I can find samples like this or have them made :-)
My Cab's made from an old Atari Pit Fighter upright 90/91

dashingw

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 99
  • Last login:February 01, 2025, 06:47:39 pm
  • Miss my 80's
Re: where to find or have overlays done ??
« Reply #1 on: February 22, 2015, 02:25:44 pm »
This is my panel.....
My Cab's made from an old Atari Pit Fighter upright 90/91

PL1

  • Global Moderator
  • Trade Count: (+1)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 9674
  • Last login:Yesterday at 10:09:36 pm
  • Designated spam hunter
Re: where to find or have overlays done ??
« Reply #2 on: February 22, 2015, 03:17:57 pm »
I am looking for something universal with no placement for buttons/joysticks to cover my panel if I decide I don't just want paint and then I can cut to fit. I'm thinking black and green with some sort of design to it but that's not set in stone. Just had light/bright green in mind as I was thinking of using that color for the T-moulding for the rest of the cabinet.
GameOnGrafix carries a variety of generic CPOs.


Scott

thomas_surles

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2118
  • Last login:September 13, 2024, 06:34:49 pm
Re: where to find or have overlays done ??
« Reply #3 on: February 22, 2015, 08:54:32 pm »