Author Topic: CNC Cut Bartop Kits - Orders Open! New Models Available! (Read 849100 times)

HaRuMaN · « **Reply #2000 on:** May 06, 2015, 02:47:16 pm »

Just ordered white & black 1/2" T-molding to add to the store, so now I have red, blue, forest green, black, and white to choose from.

heykool69 · « **Reply #2001 on:** May 06, 2015, 11:12:50 pm »

Just received and opened up my Widescreen kit.......freaking AWESOME!!!!! Well, i haven't assemble it yet. Just looking at the many pieces gives me goosebumps

Now to decide if i should get HaRuMaN's acrylic panel kit. Didn't know it was available

Curious, with those 3 holes (each player) on the front panel, seems so closed together. Will it fit this button http://groovygamegear.com/webstore/index.php?main_page=product_info&cPath=89&products_id=295[/url ? I'm barely reading thru this thread on page 9 trying to seek out ideas from other members on their final cabinet.

PS. The kit was very nicely and securely packaged HaRuMaN!!! And i didn't know it was pre-slotted for t-molding. Thanks.

HaRuMaN · « **Reply #2002 on:** May 06, 2015, 11:20:31 pm »

Thanks man!

People who have used that button typically get me to make a custom front panel.

05SRT4 · « **Reply #2003 on:** May 06, 2015, 11:26:34 pm »

Yeah the photo gallery on your website is kind of weak, need to get some more examples or finished products. Maybe a customer upload area.

HaRuMaN · « **Reply #2004 on:** May 06, 2015, 11:29:12 pm »

Quote from: 05SRT4 on May 06, 2015, 11:26:34 pm

Yeah the photo gallery on your website is kind of weak, need to get some more examples or finished products. Maybe a customer upload area.

Yeah I do. I've got some pics collected, more would be great

yotsuya · « **Reply #2005 on:** May 07, 2015, 01:16:21 am »

HaRuMaN is a very modest guy. I know for a fact he has sent out over a hundred kits, all over the US and Canada. He's not a fly-by-night operation.

efp9teen78 · « **Reply #2006 on:** May 07, 2015, 02:11:50 am »

Very helpful too He does all he can to make sure you get what you want when order from him. Glad I pulled the trigger today have a feeling wont be the last time I buy from him either.

05SRT4 · « **Reply #2007 on:** May 07, 2015, 05:48:48 am »

I agree, I don't think I would of ever been able to build any of the kits I did by myself from scratch. I just don't know what to get next.

HaRuMaN · « **Reply #2008 on:** May 07, 2015, 12:52:34 pm »

Thanks everyone!

I really should sit down and do a count and figure out just how many I've shipped. It's definitely over 100, most to the US, a few to Canada, 2 to Australia, 1 to Belgium.

I did have a guy offer to help me work on my website, but he disappeared on me. So I will struggle on

Hopefully I can make it better.

Malenko · « **Reply #2009 on:** May 07, 2015, 03:53:14 pm »

I didnt disappear on you!

HaRuMaN · « **Reply #2010 on:** May 07, 2015, 03:54:18 pm »

Quote from: Malenko on May 07, 2015, 03:53:14 pm

I didnt disappear on you!

Haha not you, it was a customer who really liked his kit & offered to help and then disappeared.

heykool69 · « **Reply #2011 on:** May 07, 2015, 04:44:24 pm »

Quote from: 05SRT4 on May 07, 2015, 05:48:48 am

I agree, I don't think I would of ever been able to build any of the kits I did by myself from scratch. I just don't know what to get next.

I don't know why, but the image of a member near the beginning of this thread stated "$140 for some woods?" somehow had burned that image in my head.....hahahaha I think it's a reasonable price eventhough i have the carpentry tools. One does not know the time you need to spend just from measuring & cutting to make it fit perfect......especially with someone like me whom has a family of two small kids.

boomerps2 · « **Reply #2012 on:** May 14, 2015, 03:32:40 pm »

I just purchased an ultimate widescreen bartop along with a couple of accessories and got a invoice that is automatically generated. I had a few questions I emailed and haven't got a response or any kind of shipping ETA/ Tracking number for the purchase. Is this business still operational?

HaRuMaN · « **Reply #2013 on:** May 14, 2015, 03:34:45 pm »

Quote from: boomerps2 on May 14, 2015, 03:32:40 pm

I just purchased an ultimate widescreen bartop along with a couple of accessories and got a invoice that is automatically generated. I had a few questions I emailed and haven't got a response or any kind of shipping ETA/ Tracking number for the purchase. Is this business still operational?

Absolutely. I haven't seen an email from you, but I will check my spam folders. Your order is in with the CNC, he is picking up more material today. I'll send you a PM with my email address.

efp9teen78 · « **Reply #2014 on:** May 14, 2015, 11:50:45 pm »

Waiting is the hardest part.

superManny · « **Reply #2015 on:** May 16, 2015, 04:11:34 pm »

Thanks for getting me the shipping info. I cant wait to get one ordered.

superManny · « **Reply #2016 on:** May 16, 2015, 04:24:20 pm »

Dumb question but once I buy the kit what is the next thing I need to do? Can you point me to the best post for me to look at.

HaRuMaN · « **Reply #2017 on:** May 16, 2015, 04:26:43 pm »

I have build instructions for each kit. Let me did up the link.

HaRuMaN · « **Reply #2018 on:** May 16, 2015, 04:30:47 pm »

Pretendo

Ultimate Widescreen

Degenatron & Widescreen

Vertical

Seanm57 · « **Reply #2019 on:** May 16, 2015, 04:41:35 pm »

Haruman,
I had asked a few questions when I placed my order as well, but never heard back. I must be in the spam folder also. However, I was able to find out the answer to one of them. I have ordered a Degenatron kit from you and I am putting in white LED Happ buttons with chrome rings. I was looking for a place where I could get chrome 1/2" t-molding. That place is here;
http://www.arcadeworlduk.com/products/chrome-half-inch-t-molding.html
Sadly, after shipping it ends up being quite expensive. 20' ran me $42. Maybe I should have waited until the dollar was doing a little better against the British Pound. I will post some pictures once I get everything assembled. I think the all black with chrome should look pretty good. Well, I hope so anyway.
I had also requested that the control panel and lower panel be blank because I wanted a different button layout. In reading through this thread, I see that you have a plan that uses the layout I wanted. Is it still early enough for me to get a button layout like the picture below?

HaRuMaN · « **Reply #2020 on:** May 16, 2015, 04:50:09 pm »

Single player?

Seanm57 · « **Reply #2021 on:** May 16, 2015, 05:02:29 pm »

Yes. Single player.

HaRuMaN · « **Reply #2022 on:** May 16, 2015, 05:06:58 pm »

Can do. What about the admin panel?

Seanm57 · « **Reply #2023 on:** May 16, 2015, 05:14:00 pm »

I think blank. Im not sure what I want to put there. Maybe just a 1 player start button and coin button with a volume control panel. Its not set in stone yet because I'm using an Ultrastick 360 and that only supports 8 buttons I think. Not totally sure how I'm allocating them yet, but I at least know I am going to use 6 of them on the control panel.

HaRuMaN · « **Reply #2024 on:** May 16, 2015, 06:02:31 pm »

Alrite sounds good

Seanm57 · « **Reply #2025 on:** May 16, 2015, 06:04:59 pm »

Thank you. Can't wait to get started. If you get a chance, can you let me know when you think the next batch will go out? I think my username for your order page is the same as the one here.

HaRuMaN · « **Reply #2026 on:** May 16, 2015, 06:30:35 pm »

I believe my cnc shop just picked up the material Friday. There are 6 orders in this batch, so probably looking at a couple of weeks depending where you are in the queue. I'll have to check.

boomerps2 · « **Reply #2027 on:** May 17, 2015, 12:43:49 am »

Hello Haruman,

I would like to start off by expressing my gratitude for answering all my questions and requests with prompt emails of which is a great business model to go by that many lack.

My question to you is that I have noticed you had a few pedestals in the design phase and was inquiring the status for any of those. I am very interested and would love to purchase one in a hurry if possible. Don't care about the wait time, just want one secured. If you have any details or a prices you can you can PM or email me because I know you got that. Again, thank you for the great service and product.

mafiafan123 · « **Reply #2028 on:** May 19, 2015, 06:14:33 pm »

Nice kits, I wish I would have found you first, I would have bought a kit from you instead of my crappy eBay one lol.

Don't be surprised though if you see an order from me in the near future though

HaRuMaN · « **Reply #2029 on:** May 19, 2015, 06:59:28 pm »

Quote from: mafiafan123 on May 19, 2015, 06:14:33 pm

Nice kits, I wish I would have found you first, I would have bought a kit from you instead of my crappy eBay one lol.

Don't be surprised though if you see an order from me in the near future though

I saw your thread and though about saying something in there, but then decided to just leave it alone.

I will say my kits are a lot easier to assemble, come slot-cut for T-molding, and have the correct size button holes to boot! Oh, and you don't have to paint!

RetroGreg · « **Reply #2030 on:** May 23, 2015, 01:28:37 am »

Hi Haruman. The dude that came and did my yearly service on our AC unit totally geeked out on my cocktail unit and thinks he might want to get his own kit. I gave him your website address and told him to just contact you since the cocktail kits aren't listed there. Who knows if he will really follow thru, but he seemed really into it for his man room and I wanted to give you a heads up.

Mocean · « **Reply #2031 on:** May 25, 2015, 12:22:03 pm »

Still hoping for a cocktail or table top cocktail to appear... No pressure

HaRuMaN · « **Reply #2032 on:** May 25, 2015, 12:24:17 pm »

So I just made some changes to the midway cocktail cabinet with the control panel assembly and I think it's ready for primetime now.

Mocean · « **Reply #2033 on:** May 25, 2015, 05:15:15 pm »

Woohoo!

If not a slim table top cocktail, would other be interested in a model with a really narrow pedestal? My RPi2 doesn't require a lot of storage space.

efp9teen78 · « **Reply #2034 on:** May 25, 2015, 05:34:48 pm »

Sometimes we just need a push. Still can't wait to see the boxes at my door.

HaRuMaN · « **Reply #2035 on:** May 25, 2015, 05:37:15 pm »

I'm out in the garage making tons of sawdust right now ;-)

05SRT4 · « **Reply #2036 on:** May 25, 2015, 05:57:51 pm »

Speaking of Cocktail kits, I am just about done with mine. Just need to clean up some things on the coin door (got from Yots thats again bruh

) and configure all the games. First time using RGB buttons so it was a pain wiring everything. Still need some glass clips, not sure if I want to try some small suction cups or just make some custom clips.

Potato shot

Might be ordering another widescreen soon

yotsuya · « **Reply #2037 on:** May 25, 2015, 07:35:50 pm »

Quote from: 05SRT4 on May 25, 2015, 05:57:51 pm

Speaking of Cocktail kits, I am just about done with mine. Just need to clean up some things on the coin door (got from Yots thats again bruh ) and configure all the games. First time using RGB buttons so it was a pain wiring everything. Still need some glass clips, not sure if I want to try some small suction cups or just make some custom clips.

Potato shot

Might be ordering another widescreen soon

That looks super tight, brother!

heykool69 · « **Reply #2038 on:** May 26, 2015, 11:26:01 am »

Quote from: 05SRT4 on May 25, 2015, 05:57:51 pm

Speaking of Cocktail kits, I am just about done with mine. Just need to clean up some things on the coin door (got from Yots thats again bruh ) and configure all the games. First time using RGB buttons so it was a pain wiring everything. Still need some glass clips, not sure if I want to try some small suction cups or just make some custom clips.

Potato shot

Might be ordering another widescreen soon

That looks clean & sweet!!!

xisorshadow · « **Reply #2039 on:** June 13, 2015, 02:34:03 am »

Hey Haruman, i had a few questions before deciding whether to buy a kit from you. 1. is it possible to make your kit compatible with sanwa sticks/buttons rather than happ/il? 2. do you do custom layouts. and 3. how do i work with you for these customisations?


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news