Author Topic: CNC Cut Bartop Kits - Orders Open! New Models Available! (Read 854739 times)

HaRuMaN · « **Reply #1920 on:** March 22, 2015, 09:37:43 pm »

Looks good! I do agree, maybe a little less on the cpo

HaRuMaN · « **Reply #1921 on:** March 22, 2015, 09:38:50 pm »

Busy weekend...

Malenko · « **Reply #1922 on:** March 22, 2015, 10:14:28 pm »

Quote from: ih8lag on March 22, 2015, 09:31:50 pm

I have been working on my artwork. It is Mortal Kombat 9 inspired. I think the CPO needs some work it may bee too busy.

put MORTAL on the left , logo in the middle , and KOMBAT on the right so its not so tiny horizontally . NOT KNOCKING IT, by why does everyone do Subbie vs Scorpion? Raiden vs Kahn , Sonya vs Kano, etc

Rick · « **Reply #1923 on:** March 22, 2015, 10:18:57 pm »

Quote from: Malenko on March 22, 2015, 10:14:28 pm

NOT KNOCKING IT, by why does everyone do Subbie vs Scorpion? Raiden vs Kahn , Sonya vs Kano, etc

Ken vs. Ryu... Err...

HaRuMaN · « **Reply #1924 on:** March 23, 2015, 04:30:15 pm »

Here's a rare beast. Someone wanted a widescreen in white, just shipped it to Tasmania, Australia this morning.

yotsuya · « **Reply #1925 on:** March 23, 2015, 04:37:43 pm »

Thanks for donating that fightstick to the BYOAC-ZAPCON project. You are gentleman, and your reputation as a seller is sound! Much obliged!

HaRuMaN · « **Reply #1926 on:** March 23, 2015, 04:40:47 pm »

Quote from: yotsuya on March 23, 2015, 04:37:43 pm

Thanks for donating that fightstick to the BYOAC-ZAPCON project. You are gentleman, and your reputation as a seller is sound! Much obliged!

No problem, should be a good time.

ih8lag · « **Reply #1927 on:** March 23, 2015, 07:54:08 pm »

Spent some time at work thinking about the CPO today and thought maybe stage concept art... I took it to the next level and wrapped the CPO and admin panel with the art. I thought what better then the dead pool an awesome level.

HaRuMaN · « **Reply #1928 on:** March 23, 2015, 07:57:29 pm »

Ok that's hawt

RetroGreg · « **Reply #1929 on:** March 23, 2015, 09:08:24 pm »

Quote from: HaRuMaN on March 23, 2015, 04:40:47 pm

Quote from: yotsuya on March 23, 2015, 04:37:43 pm
Thanks for donating that fightstick to the BYOAC-ZAPCON project. You are gentleman, and your reputation as a seller is sound! Much obliged!

No problem, should be a good time.

I didn't think you guys were serious! I thought this was a "sleep on Haruman's couch" joke.

mameshane · « **Reply #1930 on:** March 23, 2015, 09:16:59 pm »

Quote from: HaRuMaN on March 23, 2015, 04:30:15 pm

Here's a rare beast. Someone wanted a widescreen in white, just shipped it to Tasmania, Australia this morning.

What is the estimate on shipping to Australia? Brisbane, Queensland.

HaRuMaN · « **Reply #1931 on:** March 23, 2015, 09:19:17 pm »

Quote from: mameshane on March 23, 2015, 09:16:59 pm

Quote from: HaRuMaN on March 23, 2015, 04:30:15 pm
Here's a rare beast. Someone wanted a widescreen in white, just shipped it to Tasmania, Australia this morning.
What is the estimate on shipping to Australia? Brisbane, Queensland.

About $165

yotsuya · « **Reply #1932 on:** March 23, 2015, 09:25:19 pm »

Quote from: RetroGreg on March 23, 2015, 09:08:24 pm

Quote from: HaRuMaN on March 23, 2015, 04:40:47 pm
Quote from: yotsuya on March 23, 2015, 04:37:43 pm
Thanks for donating that fightstick to the BYOAC-ZAPCON project. You are gentleman, and your reputation as a seller is sound! Much obliged!

No problem, should be a good time.

I didn't think you guys were serious! I thought this was a "sleep on Haruman's couch" joke.

It actually started out that way because he was the first one to pay, but props to the master, he said lets make it happen.

RetroGreg · « **Reply #1933 on:** March 23, 2015, 09:31:46 pm »

Well thanks! Ill make good use of it

jdevane · « **Reply #1934 on:** March 25, 2015, 09:54:18 pm »

Any chance you would add a kit like the Outrun or Pole Position cabinet that johnrt made?

http://forum.arcadecontrols.com/index.php/topic,142697.120.html

http://forum.arcadecontrols.com/index.php/topic,139895.80.html

I'm guessing the PP would be easier since it doesn't have the curved back...

HaRuMaN · « **Reply #1935 on:** March 25, 2015, 09:56:16 pm »

Yes, I have to talk to johnrt to get his blessing, but it's what I want to tackle next.

SNAAKE · « **Reply #1936 on:** March 25, 2015, 10:32:49 pm »

whats next..blue color beast like the capcom cabinets

??

anyway they need to stop messing with the balance

HaRuMaN · « **Reply #1937 on:** March 25, 2015, 10:41:46 pm »

Hahaha nice!

jdevane · « **Reply #1938 on:** March 25, 2015, 11:24:55 pm »

Quote from: HaRuMaN on March 25, 2015, 09:56:16 pm

Yes, I have to talk to johnrt to get his blessing, but it's what I want to tackle next.

Cool...

bsong · « **Reply #1939 on:** March 26, 2015, 06:59:22 pm »

nice really enjoying the art work ! haruman anyway you still make the ones out of white? would love to get my hands on one just as another pet project

HaRuMaN · « **Reply #1940 on:** March 26, 2015, 07:00:23 pm »

Yes, I can do white anytime

bsong · « **Reply #1941 on:** March 26, 2015, 07:30:51 pm »

awesome, and what would you say the average size monitor that will fit in there along with the other computer parts behind comfortably

HaRuMaN · « **Reply #1942 on:** March 26, 2015, 07:34:23 pm »

Quote from: bsong on March 26, 2015, 07:30:51 pm

awesome, and what would you say the average size monitor that will fit in there along with the other computer parts behind comfortably

The widescreen? You can fit a 23" widescreen LCD in there. The case just needs to be 22" or less from left to right.

SNAAKE · « **Reply #1943 on:** April 02, 2015, 11:35:22 am »

ridin dirtay

05SRT4 · « **Reply #1944 on:** April 03, 2015, 10:08:04 am »

Hey guys,

Just wanted to share the Ultimate Widescreen kit I just finished for a friend.

Thanks again HaRuMaN, cant wait to order the next one.

HaRuMaN · « **Reply #1945 on:** April 03, 2015, 10:11:42 am »

Looks great! What are you running in there?

Malenko · « **Reply #1946 on:** April 03, 2015, 10:20:24 am »

I really like the blue accents, they really pop on that cab!

SNAAKE · « **Reply #1947 on:** April 03, 2015, 10:23:29 am »

I need to get one of those cab too..add some variety around here

where did you get that coin button?? link plz

05SRT4 · « **Reply #1948 on:** April 03, 2015, 06:12:11 pm »

Quote from: HaRuMaN on April 03, 2015, 10:11:42 am

Looks great! What are you running in there?

Micro ATX Mobo with a AMD A6 APU CPU. I haven't stepped into the world of Jamma yet.
I thought it was going to need micro everything because of the sleek profile, but its actually quite roomy in there.

So the only thing I was confused about were the magnets. You can see on the lower inside area of the back panel that's where I put them. I already put the magnet in the houses so it was, no go on getting them unscrewed unless i hacked at it. Those magnet are no joke. As having it so low I decided to not install the metal plate on the other side and left them there as a reminder.

Quote from: SNAAKE on April 03, 2015, 10:23:29 am

I need to get one of those cab too..add some variety around here

where did you get that coin button?? link plz

No problem SNAAKE
I got the coin buttons from GGG they are the NovaGemCDR Coin Drop Replacement Push button. And the others are Spectra Eclipse.

And one more of the inside CP. Yes those are Ultimarc Mag-Stik Plus joysticks. Had to change out the mounting plate for it to fit. All connected to a Ipac 4.

HaRuMaN · « **Reply #1949 on:** April 08, 2015, 10:31:33 pm »

Yeah those magnets are no joke. I typically use them for the cp on that model, but the way you did it works too.

HaRuMaN · « **Reply #1950 on:** April 10, 2015, 08:15:43 pm »

Repro tmnt panel from high density 3/4" mdf and matching plexi:

HaRuMaN · « **Reply #1951 on:** April 10, 2015, 08:17:38 pm »

That's a lot of T-molding... Just received my first shipment of 1/2" colored.

davidgilmour · « **Reply #1952 on:** April 11, 2015, 01:42:47 pm »

Quote from: HaRuMaN on April 10, 2015, 08:17:38 pm

That's a lot of T-molding... Just received my first shipment of 1/2" colored.

Hi HaRuMan, are you able to make a copy of the real original Verticade?
That is the mdf plates (no moulding) and special acrylics control panel?

http://koenigs.dk/mame/eng/drawverticade.htm

HaRuMaN · « **Reply #1953 on:** April 11, 2015, 01:44:39 pm »

Yes, I can handle something like that.

jdevane · « **Reply #1954 on:** April 11, 2015, 08:12:43 pm »

Hi, I was wondering, something like one of your widescreen bartops, what weight would you say they typically run once completed, with screen and mininum computer parts...

I'm looking at using something like a wall tv mount to hang on off the wall, of course, my next concern would be whether the weight of the player on it would pull it off too...

this one says the load capacity is about 110

http://www.ebay.com/itm/Tilt-TV-LCD-LED-Plasma-Universal-VESA-Wall-Mount-Bracket-17-20-21-23-27-30-32-37/310360613263?rt=nc&_soffid=5001328703&_soffType=OrderSubTotalOffer&_trksid=p5731.m3795

Slippyblade · « **Reply #1955 on:** April 11, 2015, 08:21:53 pm »

jdevane: Check out this thread. All his cabs are wall mounts and he talks in that thread about his hanging methods.

http://forum.arcadecontrols.com/index.php/topic,141265.msg1461909.html#msg1461909

jdevane · « **Reply #1956 on:** April 11, 2015, 08:22:49 pm »

thanks.

HaRuMaN · « **Reply #1957 on:** April 12, 2015, 10:05:45 am »

I would say 40 pounds or so, completed

SimonAmpleman · « **Reply #1958 on:** April 13, 2015, 10:08:50 pm »

Hello,

Thank you for your awesome work. I'll have a lot of fun building it

Since there is 49 pages on this topic, I just wanted to make sure that your latest plan are the ones in the first page ?

And another question, you say "shallow" in the autocad plans, do you have a specific value that you used in your build ?

Thank you

Simon

HaRuMaN · « **Reply #1959 on:** April 14, 2015, 09:49:06 am »

Quote from: SimonAmpleman on April 13, 2015, 10:08:50 pm

Hello,

Thank you for your awesome work. I'll have a lot of fun building it

Since there is 49 pages on this topic, I just wanted to make sure that your latest plan are the ones in the first page ?

And another question, you say "shallow" in the autocad plans, do you have a specific value that you used in your build ?

Thank you

Simon

Yes, those are correct. The shallow cuts (yellow in the DWG) are 0.1". The normal pockets (red) are 0.25".


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news