Author Topic: CNC Cut Bartop Kits - Orders Open! New Models Available! (Read 857159 times)

yotsuya · « **Reply #2240 on:** January 06, 2016, 06:57:35 pm »

Quote from: 05SRT4 on January 06, 2016, 06:44:24 pm

Quote from: yotsuya on January 06, 2016, 06:39:38 pm
My juke uses a 15 inch 4:3 touchscreen and it works just fine.

I was thinking of something around the same size.

Plus, you can find them pretty cheap on eBay.

Phreakwars · « **Reply #2241 on:** January 06, 2016, 07:08:45 pm »

Quote from: Wordgirl on January 06, 2016, 06:40:52 pm

Now only the 'wiring up scary electronics part' has me scared stiff! LOL

For me, that's the easy part. I can do the programming, I can do the wiring, I can do the assembly (Hey, I put together and paint high dollar motorcycles for a living). Just never give me a saw. I'll hurt myself.

HaRuMaN · « **Reply #2242 on:** January 07, 2016, 10:50:04 am »

Quote from: Wordgirl on January 06, 2016, 06:40:52 pm

Been lurking for a while, finally took the leap and joined up.

Love your work, Haruman! I saw the kit Peabo bought from you back in October and the Mr. Do BARTOP project and pretty much swooned. I have been wanting to get my husband a Mr. Do arcade setup and his birthday is coming up next month.

You all are inspiring me to maayyyybe try to build it.

I feel confident I could put a kit like yours together. Have seen some great artwork in the forums here that I can see myself using for the build, too, and I am pretty creative.

Now only the 'wiring up scary electronics part' has me scared stiff! LOL

You can do it!

The electronics aren't do hard, especially if you break it up by function and just do a piece at a time.

anthony691 · « **Reply #2243 on:** January 08, 2016, 10:00:54 am »

Got the widescreen bartop. Great kit.

Thanks Haruman, from an old BYOAC'er---I think my last login was literally a decade ago.

HaRuMaN · « **Reply #2244 on:** January 08, 2016, 10:02:55 am »

Quote from: anthony691 on January 08, 2016, 10:00:54 am

Got the widescreen bartop. Great kit.

Thanks Haruman, from an old BYOAC'er---I think my last login was literally a decade ago.

Awesome! Thank you! Glad to see some old faces again!

anthony691 · « **Reply #2245 on:** January 29, 2016, 02:23:15 pm »

I'll leave this here.

Thanks again. Great fun!

Todesengel · « **Reply #2246 on:** February 16, 2016, 04:18:51 pm »

Hey,

Is there any chance you can do a white melamine on one of your kits? Special order maybe?

Thanks,
JP

HaRuMaN · « **Reply #2247 on:** February 16, 2016, 04:25:14 pm »

Quote from: Todesengel on February 16, 2016, 04:18:51 pm

Hey,

Is there any chance you can do a white melamine on one of your kits? Special order maybe?

Thanks,
JP

I offer white melamine as a regular option. Just select that as the material when buying a kit.

scottstan · « **Reply #2248 on:** February 20, 2016, 02:09:10 am »

Hey all. I just recently a Degenatron kit from Haruman and was wondering if anyone had a template for the artwork. I've read through this entire thread and it sounds like Malenko has been doing creating some art for some Haruman's kits. Does anyone have any example files I can use as a starting point? Illustrator or Photoshop would be preferred. Haruman sent me some PNGs showing the height/width of the sideart, but I am having trouble recreating the dimensions in my editing software. Thanks!

EDIT: I found templates posted by JDFAN at post #407 in this thread. Thanks!

Scott

raniel · « **Reply #2249 on:** February 23, 2016, 12:54:53 am »

Id like to order the ultimate widescreen kit. How long it would take for you to ship it to CA? (94066). Thanks. I hope you have one available as Im going back to the Philippines on March 4th.

raniel · « **Reply #2250 on:** February 23, 2016, 01:10:52 am »

I sent you my email. please contact me. thanks!

HaRuMaN · « **Reply #2251 on:** February 23, 2016, 10:26:14 am »

Quote from: raniel on February 23, 2016, 01:10:52 am

I sent you my email. please contact me. thanks!

Email sent!

efp9teen78 · « **Reply #2252 on:** February 24, 2016, 09:44:46 pm »

Ok I know there hasn't been many people who have the cocktail cabinet done with the Haruman touch. But I for the life of me can not figure out how to mount my monitor to the top. Any helpful tips would be greatly appreciated.

yotsuya · « **Reply #2253 on:** February 24, 2016, 09:58:47 pm »

Quote from: efp9teen78 on February 24, 2016, 09:44:46 pm

Ok I know there hasn't been many people who have the cocktail cabinet done with the Haruman touch. But I for the life of me can not figure out how to mount my monitor to the top. Any helpful tips would be greatly appreciated.

I mounted the monitor to a board, then used wood blocks between the backside of the top and the board. Worked fine.

HaRuMaN · « **Reply #2254 on:** February 25, 2016, 08:25:21 am »

Quote from: yotsuya on February 24, 2016, 09:58:47 pm

Quote from: efp9teen78 on February 24, 2016, 09:44:46 pm
Ok I know there hasn't been many people who have the cocktail cabinet done with the Haruman touch. But I for the life of me can not figure out how to mount my monitor to the top. Any helpful tips would be greatly appreciated.
I mounted the monitor to a board, then used wood blocks between the backside of the top and the board. Worked fine.

That's what's included in the kit these days.

05SRT4 · « **Reply #2255 on:** February 25, 2016, 01:02:17 pm »

Quote from: efp9teen78 on February 24, 2016, 09:44:46 pm

Ok I know there hasn't been many people who have the cocktail cabinet done with the Haruman touch. But I for the life of me can not figure out how to mount my monitor to the top. Any helpful tips would be greatly appreciated.

Hey Dude,

I got the same kit and love it. As you can see I fudged up a couple of times trying to figure it out as well. I am still not sure if I installed it the intended way but it works and I am very happy with it. I dont think you would even need the 90 degree brackets I used, I kind of went screw happy on it. Haruman did a great job with these kits. The cocktail is usually the most played when I have people over.

efp9teen78 · « **Reply #2256 on:** February 25, 2016, 11:06:25 pm »

Hey Dude,

I got the same kit and love it. As you can see I fudged up a couple of times trying to figure it out as well. I am still not sure if I installed it the intended way but it works and I am very happy with it. I dont think you would even need the 90 degree brackets I used, I kind of went screw happy on it. Haruman did a great job with these kits. The cocktail is usually the most played when I have people over.

[/quote]

Hey this is a major help and explains a lot I dont have any pieces of wood that look like that. I may stop buy my local menards and buy a cheap shelve board and see if they will cut it down to size I need. I have no access to a saw and live in an apartment and we just got a good foot of snow in West Michigan last nite

One more question is that the dell 2007fp monitor uncased?

05SRT4 · « **Reply #2257 on:** February 26, 2016, 02:40:44 am »

I think I ended up using a Dell 2001FP which is still the same size I think. Picture is great even at odd angles.

RetroGreg · « **Reply #2258 on:** February 26, 2016, 07:19:48 pm »

Quote from: 05SRT4 on February 25, 2016, 01:02:17 pm

Quote from: efp9teen78 on February 24, 2016, 09:44:46 pm
Ok I know there hasn't been many people who have the cocktail cabinet done with the Haruman touch. But I for the life of me can not figure out how to mount my monitor to the top. Any helpful tips would be greatly appreciated.
Hey Dude,

I got the same kit and love it. As you can see I fudged up a couple of times trying to figure it out as well. I am still not sure if I installed it the intended way but it works and I am very happy with it. I dont think you would even need the 90 degree brackets I used, I kind of went screw happy on it. Haruman did a great job with these kits. The cocktail is usually the most played when I have people over.

This is how I mounted mine as well. Also a Dell 20".

raniel · « **Reply #2259 on:** February 28, 2016, 02:12:47 am »

Guys can you give me the link where can I buy the sticks, buttons and encoders that will fit? I just ordered the widescreen bartop from Haruman and I dont know what to order. I prefer ball type sanwa's. Thanks!

(Links or exact model number if possible)

HaRuMaN · « **Reply #2260 on:** February 28, 2016, 12:58:16 pm »

Quote from: raniel on February 28, 2016, 02:12:47 am

Guys can you give me the link where can I buy the sticks, buttons and encoders that will fit? I just ordered the widescreen bartop from Haruman and I dont know what to order. I prefer ball type sanwa's. Thanks!

(Links or exact model number if possible)

Problem is I don't know if you'll be able to get anything shipped to you before you leave.

Sanwa JLF for joysticsks
http://www.paradisearcadeshop.com/levers-sanwa/695-sanwa-jlf-tp-8yt.html
Don't forget to add a balltop.

I would get IL buttons (you'll need 12):
http://www.paradisearcadeshop.com/298-buttons-il-industrias-lorenzo

Get the cherry microswitches with them (75 gram)

raniel · « **Reply #2261 on:** February 28, 2016, 02:45:46 pm »

Yes youre right.

amazon is the only choice for me right now as I have Prime

Do you think below would work/fit my bartop kit?

Joysticks
http://www.amazon.com/gp/product/B00VZOWIYQ?keywords=sanwa%20jlf-tp-8yt&qid=1456686191&ref_=sr_1_2&sr=8-2

BUttons
http://www.amazon.com/Sanwa-OBSF-30-Tournament-Joystick-Compatible/dp/B005BZ421M/ref=pd_bxgy_21_2?ie=UTF8&refRID=09G4VXE3FFQG6SH1Y3WN

raniel · « **Reply #2262 on:** February 28, 2016, 02:47:33 pm »

But it doesnt come with microswitches.

Phreakwars · « **Reply #2263 on:** February 28, 2016, 04:08:10 pm »

Quote from: raniel on February 28, 2016, 02:47:33 pm

But it doesnt come with microswitches.

That's because the microswitch for them is built in. And yes, they will work.

HaRuMaN · « **Reply #2264 on:** February 28, 2016, 05:27:26 pm »

Those buttons are 30mm and are too big.

HaRuMaN · « **Reply #2265 on:** March 01, 2016, 09:42:40 am »

Overstock? So I had one too many Minitendo kits made in Baltic birch plywood.

Any interest in a "deluxe" kit ready to ship? Has tinted plexi for the bezel, also includes plexi marquee, marquee retainers, VESA screws, and your choice of black, white, blue, or red T-molding.

To purchase this kit from the shop would be $243 + shipping, will let it go for $200 + shipping.
LMK!

heykool69 · « **Reply #2266 on:** March 01, 2016, 05:49:36 pm »

Now i wanna get me a cocktail kit. Don't see the kit at HuRaMaN website.

HaRuMaN · « **Reply #2267 on:** March 01, 2016, 09:07:24 pm »

Quote from: heykool69 on March 01, 2016, 05:49:36 pm

Now i wanna get me a cocktail kit. Don't see the kit at HuRaMaN website.

Hey, PM incoming

HaRuMaN · « **Reply #2268 on:** March 02, 2016, 05:52:18 pm »

Quote from: HaRuMaN on March 01, 2016, 09:42:40 am

Overstock? So I had one too many Minitendo kits made in Baltic birch plywood.

Any interest in a "deluxe" kit ready to ship? Has tinted plexi for the bezel, also includes plexi marquee, marquee retainers, VESA screws, and your choice of black, white, blue, or red T-molding.

To purchase this kit from the shop would be $243 + shipping, will let it go for $200 + shipping.
LMK!

Sold!

efp9teen78 · « **Reply #2269 on:** March 05, 2016, 11:57:39 am »

Turns out I was wrong I did have those pieces of wood. They had gotten mixed in with the widescreen bartop I haven't started assembling yet. Just have to get the right length of vesa screws now and work out the artwork. Slowly coming along maybe soon I can start working on the bartop

pauleku · « **Reply #2270 on:** March 16, 2016, 03:08:33 pm »

So the widescreen CNC file looks like this on an online viewer: Is the cabinet part (file) complete or does it really not have the line(s) that look like they are missing (top middle)

HaRuMaN · « **Reply #2271 on:** March 16, 2016, 03:39:50 pm »

Don't use an online viewer, go and grab DraftSight (free). It's what I use to draw these, and you will see all lines are there.

pauleku · « **Reply #2272 on:** March 16, 2016, 08:12:08 pm »

Quote from: HaRuMaN on March 16, 2016, 03:39:50 pm

Don't use an online viewer, go and grab DraftSight (free). It's what I use to draw these, and you will see all lines are there.

Ah okay thanks!
A few other questions:
What are people doing about covering the edges of the tv (like an overlay to go over the fron on all parts but the display)?
What are people using regarding glass to go on top of that (if anything?)

Phreakwars · « **Reply #2273 on:** March 17, 2016, 04:43:59 am »

Quote from: pauleku on March 16, 2016, 08:12:08 pm

Quote from: HaRuMaN on March 16, 2016, 03:39:50 pm
Don't use an online viewer, go and grab DraftSight (free). It's what I use to draw these, and you will see all lines are there.

Ah okay thanks!
A few other questions:
What are people doing about covering the edges of the tv (like an overlay to go over the fron on all parts but the display)?
What are people using regarding glass to go on top of that (if anything?)

Black tape/Black duct tape around the edges of the monitor combined with a light window tint film on the glass/plastic overlay.

Will give you this:

Hanzie · « **Reply #2274 on:** March 17, 2016, 12:31:38 pm »

ive been thinking about picking one of these up , they look pretty cool

raniel · « **Reply #2275 on:** March 19, 2016, 09:24:41 am »

Guys any tips on mounting the joysticks? I bought the widescreen and trying to mount sanawa jlf. How do I make sure it is centered? Thanks

HaRuMaN · « **Reply #2276 on:** March 19, 2016, 10:06:46 am »

Quote from: raniel on March 19, 2016, 09:24:41 am

Guys any tips on mounting the joysticks? I bought the widescreen and trying to mount sanawa jlf. How do I make sure it is centered? Thanks

Place the joystick underneath the panel. Look down at it from the top. You should be able to line up the joystick hole with the joystick.

Hold it tightly once you have it lined up, flip everything over, and use a pencil to mark where the mounting plate holes go. Pre-drill some holes, and attach your JLF.

acjgoblu · « **Reply #2277 on:** March 19, 2016, 02:28:01 pm »

To follow up on this (and sorry if this is a noob question), what type of screw do you recommend using with your models (and a sanwa jlf joystick) to attach to the control panel? Since the top of the screws will be visible on top of the CP, do people tend to use a flatter head bolt or more of a carriage bolt? I didn't get any screws with my jlf's, so it's off to home depot with me, and I was hoping for some clarification... thanks!

HaRuMaN · « **Reply #2278 on:** March 19, 2016, 02:31:34 pm »

Quote from: acjgoblu on March 19, 2016, 02:28:01 pm

To follow up on this (and sorry if this is a noob question), what type of screw do you recommend using with your models (and a sanwa jlf joystick) to attach to the control panel? Since the top of the screws will be visible on top of the CP, do people tend to use a flatter head bolt or more of a carriage bolt? I didn't get any screws with my jlf's, so it's off to home depot with me, and I was hoping for some clarification... thanks!

I would just use a 1/2" wood screw and do it from the bottom, nothing visible from the top.

fablog · « **Reply #2279 on:** March 19, 2016, 04:58:21 pm »

You should use threaded inserts, you won't regret it!


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news