Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Question Regarding Acrylic for CP/marquee/bezel cover  (Read 1387 times)

0 Members and 1 Guest are viewing this topic.

Yourname942

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 123
  • Last login:October 01, 2016, 08:10:20 pm
Question Regarding Acrylic for CP/marquee/bezel cover
« on: February 16, 2013, 06:08:14 pm »
I'm not really sure which to choose for the control panel cover, bezel/marquee cover:
Lexan or Plexi

My question is:
- Is one better than the other? (if cost doesn't matter which would you choose?/why)
I know that plexi is harder and brittle, but ive heard that lexan is extremely durable and even bullet resistant, but is it scratch resistant? (does it scratch really easily)

Thanks.

Edit: the only thing is, the lexan sheet is 1/16" and the plexi is 1/4" thick.
I'm also using 3/4" mdf.

Edit2: I just foundhttp://www.tapplastics.com
So I can get 1/4" lexan as well.
« Last Edit: February 16, 2013, 07:39:42 pm by Yourname942 »

Yourname942

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 123
  • Last login:October 01, 2016, 08:10:20 pm
Re: Question Regarding Acrylic for CP/marquee/bezel cover
« Reply #1 on: February 16, 2013, 06:51:39 pm »
anyone know which one would be the better choice to buy?

DEIVIONCRX

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 39
  • Last login:October 23, 2014, 05:18:29 pm
  • District 1
Re: Question Regarding Acrylic for CP/marquee/bezel cover
« Reply #2 on: February 16, 2013, 08:39:36 pm »
All of it scratches pretty easy unless it has a scratch resistant coating.  But anything your going to find at Home Depot/Lowes etc isn't going to have that.  The scratch coatings are usually found on Lexan windows for cars or buildings.

Lexan(Polycarbonate) is stronger so if i was going to use it id use it for the control panel where people will be banging around.  But I'm using Acrylic on all of mine.
"Simplify, then add lightness." - Colin Chapman

Louis Tully

  • Trade Count: (+5)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1800
  • Last login:February 13, 2015, 09:41:03 pm
Re: Question Regarding Acrylic for CP/marquee/bezel cover
« Reply #3 on: February 16, 2013, 08:39:47 pm »
.
« Last Edit: February 12, 2015, 03:19:53 pm by Louis Tully »