Author Topic: 7/8" Barrel Locks (Read 7882 times)

SirPeale · « **on:** October 17, 2003, 05:02:16 pm »

7/8" Barrel Locks for sale, double bitted, keyed alike.

$4.00 each shipped in the US 48.

Xphile · « **Reply #1 on:** October 18, 2003, 08:41:50 pm »

Quote from: Peale on October 17, 2003, 05:02:16 pm

Going to be purchasing some rather soon, thought others would also need them. Looking to gauge interest so I know how many to order.

holy crap, that's a HUGE lock...are you sure it's not 3/4 or 7/8 barrel locks?

SirPeale · « **Reply #2 on:** October 19, 2003, 09:25:59 am »

AFAIK, it refers to the length of the lock, not the width. Commonly used on coin doors and back panels.

Wienerdog · « **Reply #3 on:** October 19, 2003, 03:07:02 pm »

Quote from: Xphile on October 18, 2003, 08:41:50 pm

holy crap, that's a HUGE lock...are you sure it's not 3/4 or 7/8 barrel locks?

Huge lock? I was thinking that is a tiny barrel. Who needs to lock a 1 1/8" barrel?

Xphile · « **Reply #4 on:** October 19, 2003, 11:15:10 pm »

Quote from: Peale on October 19, 2003, 09:25:59 am

AFAIK, it refers to the length of the lock, not the width. Commonly used on coin doors and back panels.

ok...but I've seen 3/4 and 7/8 wide, and you didn't specify width..:-)

(I ended up with a 2 gallon pail of locks and keys when I bought a pallet of arcade "stuff"..I still haven't matched them all up...job and a half that is..I'll prolley end up with 1 gallon of keyed barrel locks of different sizes/styles..:-)

Nannuu · « **Reply #5 on:** October 22, 2003, 10:21:56 pm »

I could do with 6 right now. Maybe even more after the next auction

CitznFish · « **Reply #6 on:** November 04, 2003, 01:29:18 pm »

I'd take 10 if they are keyed alike.

Nannuu · « **Reply #7 on:** November 05, 2003, 02:49:53 pm »

I'll take 10 instead of 6 if it helps any.

barfybuffet · « **Reply #8 on:** November 11, 2003, 12:18:20 pm »

i could use 4 of them.
i see no mention of costs involved.. how much?

DarkKobold · « **Reply #9 on:** November 11, 2003, 12:25:53 pm »

I'll take 3 if they aren't too much, and are keyed alike.

SirPeale · « **Reply #10 on:** November 11, 2003, 01:05:08 pm »

Sorry, should have mentioned prices sooner. $4.00 each shipped, all keyed alike.

JQ · « **Reply #11 on:** November 12, 2003, 02:02:57 pm »

I could use 2 of those.

Daniel
jq9@hotmail.com

mushmouth · « **Reply #12 on:** November 17, 2003, 11:29:06 am »

If these will work on a midway pac cab back door and coin door, I'll take 2...

SirPeale · « **Reply #13 on:** November 17, 2003, 05:20:00 pm »

Quote from: mushmouth on November 17, 2003, 11:29:06 am

If these will work on a midway pac cab back door and coin door, I'll take 2...

As long as the originals were 7/8", it will work just fine.

slycrel · « **Reply #14 on:** November 30, 2003, 02:23:13 pm »

Would these work with a stern coin door?

I'll have a for sure answer for you in the next few days. I have 2 places left to look at a cabinet, if I don't find anything it will be 100% custom built. =)

Thanks.

SirPeale · « **Reply #15 on:** November 30, 2003, 02:32:20 pm »

Quote from: slycrel on November 30, 2003, 02:23:13 pm

Would these work with a stern coin door?

I'll have a for sure answer for you in the next few days. I have 2 places left to look at a cabinet, if I don't find anything it will be 100% custom built. =)

As long as the original was 7/8" it should. Got a picture?

slycrel · « **Reply #16 on:** November 30, 2003, 03:06:55 pm »

Bleh. After re-measuring, it liiks like it's 3/4" not 7/8". I was originally worried about the straight lines that it had there.

SirPeale · « **Reply #17 on:** November 30, 2003, 04:26:18 pm »

The 7/8" refers to the length of the lock, not the width. I believe it's a standard size. I'll go measure mine to check.

(after) Yes, mine measure the same as yours. AFAIK, it's a standard size.

CitznFish · « **Reply #18 on:** December 03, 2003, 01:24:38 pm »

Peale,

how many are we short before the order can be placed?

eightbit · « **Reply #19 on:** December 03, 2003, 01:33:01 pm »

Do you have these or are you looking for pre-orders? I need some but can't wait for a group buy.

ntjedi · « **Reply #20 on:** December 03, 2003, 01:47:19 pm »

I can use 4 of them

SirPeale · « **Reply #21 on:** December 03, 2003, 02:30:15 pm »

We're up to 41 (counting the number here on the board) and I think that's close enough. I'm placing the order today.

slycrel · « **Reply #22 on:** December 03, 2003, 05:11:13 pm »

In that case, put me down for 3. =)

SirPeale · « **Reply #23 on:** December 03, 2003, 06:19:18 pm »

Good news, everyone! The distributor called and said they were out of single bitted locks. They have upgraded to double bitted for the same price.

ntjedi · « **Reply #24 on:** December 03, 2003, 07:31:31 pm »

Woo-Hoo!!!

Yeah, im a dork.

CitznFish · « **Reply #25 on:** December 04, 2003, 12:52:12 pm »

Quote from: Peale on December 03, 2003, 06:19:18 pm

Good news, everyone! The distributor called and said they were out of single bitted locks. They have upgraded to double bitted for the same price.

Can i be the first to say, WhatchutalkinboutWillis?

I have no idea what single or double bitted locks are.

ntjedi · « **Reply #26 on:** December 04, 2003, 01:00:35 pm »

Quote from: CitznFish on December 04, 2003, 12:52:12 pm

Quote from: Peale on December 03, 2003, 06:19:18 pm
Good news, everyone! The distributor called and said they were out of single bitted locks. They have upgraded to double bitted for the same price.

Can i be the first to say, WhatchutalkinboutWillis?

I have no idea what single or double bitted locks are.

A single bit lock only has tumblers on one side while a double bit lock has both. If you look at a standard house key, it is a single bit with a smooth side and the "rough" side. A double bit has two "rough" sides on the key.

I hope this helps.

pepsidx20 · « **Reply #27 on:** December 04, 2003, 02:57:45 pm »

I will take 2 also please. Just let me know where to send you the M.O

SirPeale · « **Reply #28 on:** December 04, 2003, 03:44:20 pm »

We'll just wait until I get them before I start 'taking orders.' Should be Monday.

SirPeale · « **Reply #29 on:** December 09, 2003, 01:41:09 pm »

Yep! It was Monday. I'll be posting when I'm ready to 'take orders'

SirPeale · « **Reply #30 on:** December 10, 2003, 11:33:39 am »

I've sent a PM to all those who wanted a lock.

SirPeale · « **Reply #31 on:** December 11, 2003, 01:13:03 pm »

These are quite nice. I just outfitted my cabinet with a couple. Quite snug.

ntjedi · « **Reply #32 on:** December 16, 2003, 10:39:04 am »

Great Locks. Got mine yesterday and they look great in the cabinet. Its amazing how the little things can really put a shine to your games.

Thanks for all your effort in the Peale. You da man.

If you havent got your yet I highly recommend them. These are great locks and at a great price (IMO).

mushmouth · « **Reply #33 on:** December 16, 2003, 12:30:14 pm »

Ntjedi, I AGREE.

I ordered a pair of these, as well as a couple of coin mechs and they got here QUICK. I hope more people order some of these. I'd like to think that staple items like these will continue to be offered on here by people like Peale. Quick disconnects, barrel locks, coin mechs... Yeah you can find this stuff, but Peale, bro, you make it really easy and AFFORDABLE.

Thanks man.

SirPeale · « **Reply #34 on:** December 16, 2003, 12:43:24 pm »

Thanks a lot guys, it means a lot.

Some of the people who were interested in these locks have not yet spoken up. I still have quite a few available.

slycrel · « **Reply #35 on:** December 17, 2003, 11:40:51 pm »

I'll let you know how mine go. I'm eagerly checking the mail for them.

CitznFish · « **Reply #36 on:** December 19, 2003, 06:00:39 pm »

I got my locks yesterday. Peale is a class act, very easy to deal with.

Thank you Peale.

P.s. My dogs LOVED the bubble wrap!

SirPeale · « **Reply #37 on:** January 28, 2004, 11:12:04 am »

I've still got a few left. Who wants some?

Buddabing · « **Reply #38 on:** January 28, 2004, 11:52:09 am »

Quote from: Peale on January 28, 2004, 11:12:04 am

I've still got a few left. Who wants some?

Do they work with coin doors?

SirPeale · « **Reply #39 on:** January 28, 2004, 12:52:57 pm »

They're FOR coin doors. Well, back doors too I suppose, if your back door locks.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news