Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: AimTrak-Converting a Namco Recoil Gun  (Read 75508 times)

0 Members and 1 Guest are viewing this topic.

FrenchGamer

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 4
  • Last login:January 11, 2019, 11:48:17 am
  • I want to build my own arcade controls!
Re: AimTrak-Converting a Namco Recoil Gun
« Reply #360 on: January 11, 2019, 11:48:17 am »
Hello! Nobody can help me  :-[?

You will need the kit that you linked to (the camera module, sensor bar and trigger buttons)

You will not need a PSU unless you want to have recoil, If you want recoil you will need the recoil solenoid and a PSU.

As for installing it in your gun I have no idea sorry.
Thanks you, but I think I Can use the solenoid and the PSU of my Jolt Gun and not buy another? That I understood  :-\

Yeah that's right. I just did this last night with my jolt gun using the instructions on page 8 of this thread.
I'll do a proper write up in a day or so but some points of note.

I used option 1 and took route 3b. It took me 4 hours with 2 of us.
There was more plastic cutting than I expected but we managed to cut it to hold the board without the need for glue!
Everything is a really tight fit!
The soldering on the board is very tiny. you'll want some experience and a steady hand.
My PS1 cable colours didn't match any of the other people in this thread but the positions of the +ve and Ground wires was the same on the PS board.

Pod

P.s Cheers to everyone in this thread!

Hi Podbod!

Thank you, I hope you will soon offer us your proper write up, I would surely find answers to my questions in it.

Now I have the complet box Jolt Gun, and the aimtrak pack

https://www.ultimarc.com/aimtrak_module.html

And if you can make some pictures of your custom Jolt gun, it will be so nice! thank you for all!





Bojo5150

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10
  • Last login:October 14, 2019, 05:48:36 pm
  • I want to build my own arcade controls!
Re: AimTrak-Converting a Namco Recoil Gun
« Reply #361 on: April 27, 2019, 09:58:21 am »
Question for the group...

I have 2 AimTrak recoil guns on my cabinet and I recently picked up a “named” Namco knockoff in hopes to convert it to an  AimTrak with the Namco solenoid. I’ve read this entire thread and it seems like it’s a rather difficult conversion for someone with no knowledge of DC circuitry.

My question is, can I not simply disconnect the AimTrak solenoid wires to the Namco solenoid wires and the AimTrak trigger wires to the Namco trigger?

All help is very much appreciated!

mangueboy

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 8
  • Last login:October 03, 2019, 04:58:28 pm
  • I want to build my own arcade controls!
Re: AimTrak-Converting a Namco Recoil Gun
« Reply #362 on: August 30, 2019, 11:58:39 am »
Ah-ha! Turns out the auto fire issue is because of the auto reload functionality. I don't have a manual. Can someone explain how auto fire /program mode works?

It still struggles if you press the fire button too quickly but I seem to recall that was an issue when I had one as a kid. Something the namco arcade ones don't (or at least I don't recall them having). Probably a better solenoid?

P

Are you using this gun with an AimTrak or using it wit PS1?

I had a brand new one when I bought one so I have the original manual and power supply. I post what I can find out.

Hello, SlyblueFox. First, thanks for the great mod project. I bought two jolt guns  and  completed the mod  of one them with (Option #1) normal single fire and  autofire enable. Now, I need your opinion on a possible solution to retain autofire and not off screen recoil, using a aimtrak recoil PCB, like schematic below. I did a test with recoil signal and  and measured standard 0v by default. Then i wire one 12v power supply to V+, V and S1, S2 output of Aimtrak recoil PCB to Jolt Gun 12V  supply connections points. Then i ground G point and  supply 5v to R (recoil) point in Aimtrak recoil PCB. Nothing happened with S1 and S2 points that continued to measure 12v. I think that supply 5v  to point with block s1 an s2 any voltage, since i see this power when G points was disconnect. Please, what type of signal the recoil connection of a Aimtrak Gun PCB will gives when you tries fire off screen? What your opinion about schematic below? Will this solution work?

Update: Finally i assembly in Jolt Gun one Recoil PCB, but not have time to test yet if the RAG wiil not  recoil offscreen. I  suffered with bed solding of V+ e V- and S1 and S2. Make sure you will do a really good solding of this points or 12V output will fail several times. I use Replacement USB/Power Cable (http://www.ultimarc.com/store/section.php?xSec=7), but inside of RAG i use part of original power wire of Jolt Gun, because it is more thin.
« Last Edit: September 04, 2019, 08:20:02 am by mangueboy »

TobiasRieper

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 23
  • Last login:December 04, 2019, 08:15:09 am
  • I want to build my own arcade controls!
Re: AimTrak-Converting a Namco Recoil Gun
« Reply #363 on: December 04, 2019, 07:21:27 am »
I've been reading up on this thread, amazing work guys!! All I want to do is make my own recoil kit for my Aimtrack gun. Got the schematic from the first post on the board so that eliminates the need for a recoil board from ultimarc. Can anyone recommend a decent solenoid for the aimtrack shell? I want to keep everything stock as much as possible! Cheers :)

Zebra

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 425
  • Last login:Yesterday at 10:21:23 pm
  • I want to build my own arcade controls!
Re: AimTrak-Converting a Namco Recoil Gun
« Reply #364 on: December 04, 2019, 07:55:01 pm »
If it's just semi auto recoil you want, you might as well use the Ultimarc solenoid as it fits out the box and is relatively cheap. It's actually not bad (for semi auto recoil) if you use it as intended.

If you want full auto recoil, the least expensive option I found is to convert one of the PS1 jolt guns. They can usually be found cheap on ebay.

The Aimtrak shell is too small to fit any decent arcade recoil solenoid. Even the ones from Happ recoil guns don't fit and they are among the smallest arcade recoil pistols I've seen.

The only inexpensive arcade (full auto) recoil solenoid I know of that can be bought new is the Terminator Salvation ones from Betson. They won't fit an Aimtrak shell but they are awesome.