Author Topic: Wiring power button help - HP P6710F (Read 1540 times)

jcutler0902 · « **on:** October 11, 2011, 11:04:57 am »

Hello,

I am helping a friend of mine finish his mame machine. I am trying to wire a power button from the cabinet to his desktop to power it on. I was successful in wiring mine, however his has some additional wires. Can someone take a look at advise with some ideas or is familiar with this HP setup?

One pic is where it plugs into the motherboard. The second pic shows the number of wires.

Thanks!
Jason

Drnick · « **Reply #1 on:** October 11, 2011, 12:37:49 pm »

That connection has Power switch, HDD and Power LEDs and possibly a reset button connected. Unfortunately there is no definitive pinout

but see the following page which should be the same

http://h30434.www3.hp.com/t5/Desktop-Hardware/ASUS-IPIBL-LA-Motherboard/m-p/473293#M27158

jcutler0902 · « **Reply #2 on:** October 14, 2011, 03:57:11 pm »

I think you hit the nail on the head. I guess my only question is what wires needs to be spliced in order to power down and power up?
I assume PWRSW and Ground?

Fortunately my desktop only had two wires going to it, much easier.

Any thoughts?


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Wiring power button help - HP P6710F (Read 1540 times)

jcutler0902

Wiring power button help - HP P6710F

Drnick

Re: Wiring power button help - HP P6710F

jcutler0902

Re: Wiring power button help - HP P6710F