Author Topic: NovaMatrix LINX LED Marquee Light (Read 2289 times)

Woodshop Flunky · « **on:** July 19, 2011, 03:34:15 am »

I got the NovaMatrix marquee light from Groovy Game Gear and have it installed in my cab.

Now, my cab is small (about 3/4 the size of a Galaga machine) and the marquee is only about 17x6 inches. For my size cab, I think the marquee is a bit bright. I could remove an LED or two, but I already have them installed, and I like the coverage. I'm powering the light with a wall wart that can be switched from 3v to 12v. I switched the voltage to 9v and I think the marquee looks great.

Does anyone know if operating the NovaMatrix on 9v instead of 12v will shorten the life of the LEDs? I know some electronic devices respond adversely when operated at power levels below what they were designed for.

Thanks.

BobA · « **Reply #1 on:** July 19, 2011, 06:55:25 am »

Running at 9V will actually increase the life of the LEDs as it is dissipating less power.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: NovaMatrix LINX LED Marquee Light (Read 2289 times)

Woodshop Flunky

NovaMatrix LINX LED Marquee Light

BobA

Re: NovaMatrix LINX LED Marquee Light