Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: my new problem...  (Read 1163 times)

0 Members and 1 Guest are viewing this topic.

jolietcr14

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 7
  • Last login:January 31, 2011, 01:21:53 pm
my new problem...
« on: January 25, 2011, 10:19:50 pm »
just swapped mk3 board for sf hyper fighting...cant seem to access my menu to put on free play...manual says there is a switch in the  coin door but after drillin out locks ..opened the door and see no switch....im sure its an easy explanation but this is my first board swap!!!...
Logged

Nephasth

  • Guest
  • Trade Count: (0)
Re: my new problem...
« Reply #1 on: January 25, 2011, 10:39:59 pm »
Just wire up a switch to the pins on the board for the switch that is supposed to be behind the coin door.
Logged

BobA

  • Trade Count: (+14)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5943
  • Last login:July 11, 2018, 09:52:14 pm
  • What Me Worry?
Re: my new problem...
« Reply #2 on: January 25, 2011, 11:18:29 pm »
You might already have a test switch somewhere in you cab. Check the jamma connector to see if one is already wired.
Logged

jolietcr14

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 7
  • Last login:January 31, 2011, 01:21:53 pm
Re: my new problem...
« Reply #3 on: January 26, 2011, 11:03:26 am »
FIGURED IT OUT...YOU SET THE DIPSWITCHES...THANKS GUYS
Logged
Pages: [1]
  
Go Up
« previous next »