Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: How to poewr the light bulb on my Happ Track Ball?  (Read 3268 times)

0 Members and 1 Guest are viewing this topic.

shateredsoul

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1412
  • Last login:January 25, 2013, 08:23:51 pm
How to poewr the light bulb on my Happ Track Ball?
« on: September 02, 2010, 08:25:59 pm »
Sooo my trackball has a lightbulb underneath, how do I light it?  Is there any best way? Is there a way to light it via usb?
Logged

bkenobi

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1668
  • Last login:August 16, 2021, 10:41:52 pm
Re: How to poewr the light bulb on my Happ Track Ball?
« Reply #1 on: September 02, 2010, 08:40:26 pm »
I'd plug it in.
Logged

shateredsoul

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1412
  • Last login:January 25, 2013, 08:23:51 pm
Re: How to poewr the light bulb on my Happ Track Ball?
« Reply #2 on: September 02, 2010, 08:49:28 pm »
with what?.... there's no plug
Logged

bkenobi

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1668
  • Last login:August 16, 2021, 10:41:52 pm
Re: How to poewr the light bulb on my Happ Track Ball?
« Reply #3 on: September 02, 2010, 11:18:18 pm »
I'd use power.   :cheers:
Logged

EvilNuff

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 430
  • Last login:February 24, 2024, 04:41:13 pm
Re: How to poewr the light bulb on my Happ Track Ball?
« Reply #4 on: September 02, 2010, 11:41:34 pm »
I believe 12v dc and ground should work for the two connectors.
Logged

drventure

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4152
  • Last login:April 23, 2024, 06:53:06 pm
  • Laser Death Ray Bargain Bin! Make me an offer!
Re: How to poewr the light bulb on my Happ Track Ball?
« Reply #5 on: September 03, 2010, 12:11:43 am »
If you want to go usb, I picked up a couple of these USB snake lights for dirt cheap and used them.

They're very bright and pretty much the easiest thing you can do to light a trackball.



Although, hooking up 12v isn't terribly difficult either.
Logged

shateredsoul

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1412
  • Last login:January 25, 2013, 08:23:51 pm
Re: How to poewr the light bulb on my Happ Track Ball?
« Reply #6 on: September 03, 2010, 02:32:42 am »
the light bulb isalready attached under the trackball, it's not connected to a power source as far as I can tell
Logged

surface tension

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 323
  • Last login:July 01, 2018, 08:45:48 am
  • feel the tension...
    • surface tension tables
Re: How to poewr the light bulb on my Happ Track Ball?
« Reply #7 on: September 03, 2010, 02:46:28 am »
I'm not aware of any official Happ illuminated trackballs, so where did the illumination kit come from... or is it really just a bulb poking through the hole? Did it not come with instructions?

By far the cheapest and easiest way to illuminate Happ trackballs is an LED and a resistor, connected to the 5V on the control board.
Logged

Smeghead

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 415
  • Last login:November 05, 2015, 11:41:08 pm
  • Better Smeg than dead
    • MY MAME BUILDS
Re: How to poewr the light bulb on my Happ Track Ball?
« Reply #8 on: September 03, 2010, 09:31:14 am »
12v AC Adapater, 5v USB power isnt good enough to shine through a ball, I tried it
Logged
My MAME Build:

bkenobi

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1668
  • Last login:August 16, 2021, 10:41:52 pm
Re: How to poewr the light bulb on my Happ Track Ball?
« Reply #9 on: September 03, 2010, 11:18:48 am »
Quote from: shateredsoul on September 03, 2010, 02:32:42 am
the light bulb isalready attached under the trackball, it's not connected to a power source as far as I can tell

See, there's the problem.  You will need to connect the light to power to get anything visible out.
Logged

Hoopz

  • Don't brand me a troublemaker!
  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5285
  • Last login:June 13, 2025, 09:18:32 pm
  • Intellivision Rocks!
Re: How to poewr the light bulb on my Happ Track Ball?
« Reply #10 on: September 03, 2010, 11:48:45 am »
Quote from: bkenobi on September 03, 2010, 11:18:48 am
Quote from: shateredsoul on September 03, 2010, 02:32:42 am
the light bulb isalready attached under the trackball, it's not connected to a power source as far as I can tell

See, there's the problem.  You will need to connect the light to power to get anything visible out.
:laugh2:
Logged

FrizzleFried

  • no one listens to me anyway.
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5146
  • Last login:July 24, 2025, 09:28:02 am
    • Idaho Garagecade
Re: How to poewr the light bulb on my Happ Track Ball?
« Reply #11 on: September 03, 2010, 12:02:40 pm »
These guys are just foolin' with ya...

Run a wire from one of the "hard drive" molex connectors from your power supply to the lamp... you want yellow and black I do believe (12v).

Logged
Visit my arcade blog at: www.idahogaragecade.com (Updated 10-28-21)

shateredsoul

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1412
  • Last login:January 25, 2013, 08:23:51 pm
Re: How to poewr the light bulb on my Happ Track Ball?
« Reply #12 on: September 03, 2010, 03:34:30 pm »
Quote from: FrizzleFried on September 03, 2010, 12:02:40 pm
These guys are just foolin' with ya...

Run a wire from one of the "hard drive" molex connectors from your power supply to the lamp... you want yellow and black I do believe (12v).



Thanks! I guess I was just looking for a way to avoid opening up my pc.

 :angry: @ the rest of you!

give a guy a break! Don't have to bust my balls, eesh! ha ha ha ok  :P

Logged

atomikbohm

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 198
  • Last login:January 22, 2018, 11:33:35 am
Re: How to poewr the light bulb on my Happ Track Ball?
« Reply #13 on: September 03, 2010, 05:21:59 pm »
Quote from: shateredsoul on September 03, 2010, 03:34:30 pm

Don't have to bust my balls, eesh! ha ha ha ok  :P


How much power does that take?  ???

Just kidding, it's all in fun, sorry   :angel:
Logged

bkenobi

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1668
  • Last login:August 16, 2021, 10:41:52 pm
Re: How to poewr the light bulb on my Happ Track Ball?
« Reply #14 on: September 03, 2010, 11:35:34 pm »
 :laugh2:
Logged
Pages: [1]
  
Go Up
« previous next »