Author Topic: U360 Issue (Read 1457 times)

bmac300 · « **on:** June 08, 2010, 07:59:53 pm »

I just plugged in my Ultrastik 360 and I've run into a problem with the left and right being reversed. If i rotate the joystick my up and down is reversed. This has to be something simple but i can't figure out why it is doing this. Could it be that the board with the usb connector and LED light was put on upside down? I can't find a good picture but my LED light and USB is on the bottom of the joystick. From the pic on the website it looks as if this should be on the inside of the joystick if you know what i mean. Does this make sense to anyone? Also, i see some text on the board that says up and again this is on the bottom of the joystick. If this is the case can i just unscrew and flip it around?

SammyWI · « **Reply #1 on:** June 08, 2010, 08:10:13 pm »

Yes, the LED and USB port should be upward or 'inside' on the joystick. Unscrew the board and flip it over and you should be fine.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: U360 Issue (Read 1457 times)

bmac300

U360 Issue

SammyWI

Re: U360 Issue