Author Topic: mouse x axis left right backwards (Read 1181 times)

SteveJ34 · « **on:** April 17, 2010, 06:42:04 pm »

I have a 3" happs trackball and a hagstrom ke-72T encoder.

I took the mouse apart to give it a cleaning, put it back, all is hooked the way it started, and now the x-axis is backwards, ie: roll left mouse pointer moves right, roll right mouse pointer moves left.

I swapped the opti boards, didnt expect that to be the problem. Problems stays with x axis.

What am I forgettnig?

Steve

bkenobi · « **Reply #1 on:** April 17, 2010, 10:16:25 pm »

Is it possible to switch the connector direction? I thought the connector was keyed, but if not then that would be the first thing I would check.

SteveJ34 · « **Reply #2 on:** April 18, 2010, 09:08:35 am »

The connector is keyed so it only is made to attach in one direction.

After messing with this for quite some time I realized the keys were no longer mapped to the default KE72T configuration.....for some reason the encoder seems to have lost its "mind".

I used the config tool to reload the default configuration and all is working now...including trackball x axis problem fixed.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: mouse x axis left right backwards (Read 1181 times)

SteveJ34

mouse x axis left right backwards

bkenobi

Re: mouse x axis left right backwards

SteveJ34

Re: mouse x axis left right backwards