Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Wiring CP with IPAC  (Read 1026 times)

0 Members and 1 Guest are viewing this topic.

bleakboy

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 22
  • Last login:January 13, 2016, 04:27:05 pm
  • I'm Scared Danger Mouse
Wiring CP with IPAC
« on: July 29, 2003, 06:57:23 pm »
Hi

Just finished wiring my CP and plugged it in and no buttons or joysticks are working

Just a question the Ground is wired in series , i.e p1, to p2, etc....

does the end of the group go back to the ipac or just stop and if i have wired it back to the ipac is this the reason or should i test each button one by one
Logged

SirPoonga

  • Puck'em Up
  • Global Moderator
  • Trade Count: (+1)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 8190
  • Last login:August 18, 2025, 08:28:46 pm
  • The Bears Still Suck!
Re:Wiring CP with IPAC
« Reply #1 on: July 29, 2003, 07:07:01 pm »
Look about 2/3 the way down.  You have it wired like that?

http://www.ultimarc.com/ipac2.html
Logged

bleakboy

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 22
  • Last login:January 13, 2016, 04:27:05 pm
  • I'm Scared Danger Mouse
Re:Wiring CP with IPAC
« Reply #2 on: July 29, 2003, 07:17:27 pm »
It is wired excatly like that but i have the ground on the last button going back to the ground is this wrong  ??? ???
Logged

SirPoonga

  • Puck'em Up
  • Global Moderator
  • Trade Count: (+1)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 8190
  • Last login:August 18, 2025, 08:28:46 pm
  • The Bears Still Suck!
Re:Wiring CP with IPAC
« Reply #3 on: July 29, 2003, 07:45:24 pm »
going back tot he ground where?

Basically you connect the grounds of the buttons together, daisy chain them like the pic then also have that ground goto the ipac ground.
Logged

bleakboy

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 22
  • Last login:January 13, 2016, 04:27:05 pm
  • I'm Scared Danger Mouse
Re:Wiring CP with IPAC
« Reply #4 on: July 29, 2003, 07:57:27 pm »
Figured it out i was running from the ground to the button, then the next like the ipac diagram but on the last ground i was then running this back to the ipac, disconnected the cable and it all works apart from p2 and p2 right which is most likely a wiring problem but thanks for the help,

Really apprieciate it, Right next onto the cab
Logged
Pages: [1]
  
Go Up
« previous next »