Author Topic: Monitor short at top (Read 1158 times)

speedklz · « **on:** January 23, 2010, 07:24:22 pm »

What is causing this. Notice the top dont show all of it its like 2 to 4 lines or more cut off.

grantspain · « **Reply #1 on:** January 23, 2010, 08:11:04 pm »

looks like horizontal hold and size issue

speedklz · « **Reply #2 on:** January 23, 2010, 08:23:32 pm »

I have tried every setting it just crops the top off.

grantspain · « **Reply #3 on:** January 23, 2010, 08:37:01 pm »

what monitor is it?

Kevin Mullins · « **Reply #4 on:** January 23, 2010, 10:19:19 pm »

I believe there is a pot on the boardset itself also to adjust.

speedklz · « **Reply #5 on:** January 24, 2010, 11:04:53 am »

it is a WG 7000 I did try the 50/60 hz pot but that caused it to roll over at the top.

grantspain · « **Reply #6 on:** January 24, 2010, 11:21:09 am »

try a width jumper if your chassis has it

speedklz · « **Reply #7 on:** January 24, 2010, 09:11:07 pm »

There is a jumper for left, right center adjust but not for this as I can see. I think mabey the board needs some tlc.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news