Author Topic: Is anyone else addicted to How It's Made? (Read 2330 times)

javeryh · « **on:** September 06, 2009, 11:34:27 pm »

I just can't get enough of this show.

Franco B · « **Reply #1 on:** September 07, 2009, 01:24:50 am »

Hell yea.

I have only seen a couple at my friends house but I loved it. I think the only ones I have was where they made baseball bats, tennis balls and vinyl records but it was great.

drventure · « **Reply #2 on:** September 07, 2009, 01:52:55 am »

Hehe. Yep, me and my 5 yo daughter watch it all the time at lunch.

There was one about how they spun aluminum sheets into woks and pans that was fascinating. Reminded me of what I've seen of Franco's stuff here. There's a lot of skill that goes into that process...

DaOld Man · « **Reply #3 on:** September 07, 2009, 11:24:24 am »

I like the show.. very interesting.

Franco B · « **Reply #4 on:** September 07, 2009, 11:28:04 am »

Quote from: drventure on September 07, 2009, 01:52:55 am

Hehe. Yep, me and my 5 yo daughter watch it all the time at lunch.

There was one about how they spun aluminum sheets into woks and pans that was fascinating. Reminded me of what I've seen of Franco's stuff here. There's a lot of skill that goes into that process...

Heh cool

Well if you want any vids I could always do some for you

protokatie · « **Reply #5 on:** September 07, 2009, 02:31:17 pm »

I think its funny how the show gets translated TWICE before we see it in the US. From french to english, then from english to american. Some oddities pop up from this, such as once they stated somethings temp as *** degrees Fahrenheit and had a little popup come up and say "That's *** Degrees Fahrenheit", as if to translate from centigrade. LOL Silly Quebecois...

RayB · « **Reply #6 on:** September 07, 2009, 08:16:09 pm »

THere's an episode that shows how pinball machines are made.
I haven't seen it.

protokatie · « **Reply #7 on:** September 07, 2009, 08:26:47 pm »

Quote from: RayB on September 07, 2009, 08:16:09 pm

THere's an episode that shows how pinball machines are made.
I haven't seen it.

I have. It isn't anything anyone here would like. It is very very basic. Well, the show in general is as it is meant for those who know little or nothing about the stuff they show being made. Basically for the pinball episode, they only show the assembly of the machine, as well as packaging. They do not go into any more detail (unfortunetly).

drventure · « **Reply #8 on:** September 07, 2009, 10:00:36 pm »

Yeah, the pinball episode was pretty cool. They showed the making of a LOTR machine.

javeryh · « **Reply #9 on:** September 08, 2009, 12:41:16 pm »

I just watched them make some hot dogs and now I'm not sure I can ever eat another one.

Kevin Mullins · « **Reply #10 on:** September 08, 2009, 02:23:30 pm »

Quote from: RayB on September 07, 2009, 08:16:09 pm

There's an episode that shows how pinball machines are made.
I haven't seen it.

Not a bad episode, considering the target audience like protokatie was describing.

Fordman · « **Reply #11 on:** September 08, 2009, 09:29:01 pm »

At one time PBS had a similar show in the 80's early 90's. I think the Discovery Channel bought the rights to it, but never made anything of it until 3 years ago. They only used the program as a time filler late at night or on a Sunday afternoon.

I work in an auto plant and Im still amazed at what we do and how its done. I see it everyday and still say WOW! Although the repition gets a little old at times, but the line doesnt stop. 43 seconds to put a dash into a car. 21 seconds to install the a door. .23 seconds to install a steering column. 38 seconds to install a seat. 14 seconds to install certain interior trim. Anywhere from 48 to 64 jobs per hour. Yes, 1 completed car every minute. One of the hardest and most dangerous jobs is to put the 2 gallons of gas in the tank. You gotta get it right in 14 seconds!

[youtube]http://www.youtube.com/watch?v=EYWhYfJR-SA[/youtube]

In the part where they say most parts come to the line worker already assembled, the parts are assembled on a sub-assembly line.

Fordman

RayB · « **Reply #12 on:** September 09, 2009, 08:31:03 pm »

Quote from: Fordman on September 08, 2009, 09:29:01 pm

In the part where they say most parts come to the line worker already assembled, the parts are assembled on a sub-assembly line, located in China or Mexico.

Fixed that for ya.

Fordman · « **Reply #13 on:** September 09, 2009, 10:07:29 pm »

Quote from: RayB on September 09, 2009, 08:31:03 pm

Quote from: Fordman on September 08, 2009, 09:29:01 pm
In the part where they say most parts come to the line worker already assembled, the parts are assembled on a sub-assembly line, located in China or Mexico.
Fixed that for ya.

Actually very little content comes from Mexico or China. The sub assembly lines are right there in the plant. They assemble the dash, doors, lighing, engine/transmission mating, tire to wheel assembly and the likes and are all sent to the line via conveyor system.

boykster · « **Reply #14 on:** September 10, 2009, 10:15:42 pm »

Nat Geo channel has a similar show called Factory Floor with Marshall Brain

http://channel.nationalgeographic.com/series/factory-floor/all/Overview

seems really related, but I dunno. It often goes a tad more in depth than How Its Made does. I really enjoy How Its Made - neat show.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news