Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: touch screen monitor  (Read 4371 times)

0 Members and 1 Guest are viewing this topic.

prezo1

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 44
  • Last login:February 28, 2020, 07:45:03 pm
touch screen monitor
« on: February 13, 2009, 06:24:43 pm »
i have bought a touch screen monitor to make a jukebox.i have set the screen up but when i touch it the cursor moves away from my finger,about 2"  to the right.i have downloaded the latest drivers for it and cleaned the screen.any ideas please.
it is a 3M 17 Inch MicroTouch Touch Screen LCD Flat Monitor
thanks

prezo 
« Last Edit: February 13, 2009, 06:28:35 pm by prezo1 »
Logged

sarge

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 159
  • Last login:April 27, 2015, 01:42:54 pm
Re: touch screen monitor
« Reply #1 on: February 13, 2009, 06:35:07 pm »
Did you try to calibrate it???
Logged

prezo1

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 44
  • Last login:February 28, 2020, 07:45:03 pm
Re: touch screen monitor
« Reply #2 on: February 14, 2009, 08:01:14 am »
yes i have tried on 2 and 4 corner calibration.
Logged

Kevin Mullins

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4504
  • Last login:February 01, 2021, 01:29:34 pm
    • Me on Myspace
Re: touch screen monitor
« Reply #3 on: February 14, 2009, 09:55:56 am »
What model monitor is it ?

Are you running the 3M MT 7.12 drivers and utilities ?
http://www.touchscreens.com/support-drivers-microtouch.html

Try going into the MICROTOUCH CONTROL PANEL then TOOLS and RESETTING the controller.
And then re-calibrate.

There's always a chance it's just a bum screen too.
« Last Edit: May 01, 2010, 12:45:23 am by Kevin Mullins »
Logged
Not a technician . . . . just a DIY'er.

coinopman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 24
  • Last login:June 09, 2009, 09:18:53 pm
Re: touch screen monitor
« Reply #4 on: February 17, 2009, 09:57:46 pm »
make sure u have a good ground. place one hand on a known grounded metal area. then touch screen if it works properly then u have a ground issue.
Logged

shrunkenmaster

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 636
  • Last login:August 04, 2025, 02:11:33 am
Re: touch screen monitor
« Reply #5 on: April 30, 2010, 02:04:32 pm »
Having troubles too with a 3m touchscreen, just posted in the monitors forum - any answers?
Logged

lilshawn

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7516
  • Last login:September 13, 2026, 07:21:24 pm
  • I break stuff...then fix it...sometimes
Re: touch screen monitor
« Reply #6 on: April 30, 2010, 03:39:01 pm »
not sure about the 3-m controllers, but the ELO ones have an advanced calibration. you have to touch the screen about 20 times all over but it works.

have a look through the programs and the options you may find something similar.

Logged

shrunkenmaster

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 636
  • Last login:August 04, 2025, 02:11:33 am
Re: touch screen monitor
« Reply #7 on: April 30, 2010, 03:53:59 pm »
hi lilshawn, I take it you don't mean trying ELO drivers instead? I've exhausted all the install/config options with the 3M drivers. Tried version 12 and 13 of the 3M drivers and the calib is still way off. Maybe I have a duff screen.
Logged

Franco B

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3766
  • Last login:February 15, 2024, 09:14:06 am
Re: touch screen monitor
« Reply #8 on: April 30, 2010, 04:06:32 pm »
Maybe you do have a faulty screen. I bought two 17" 3M Microtouch's, downloaded the drivers and it has worked fine on the first one I have tried. I haven't tried the second one though.
Logged

lilshawn

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7516
  • Last login:September 13, 2026, 07:21:24 pm
  • I break stuff...then fix it...sometimes
Re: touch screen monitor
« Reply #9 on: April 30, 2010, 04:46:06 pm »
Quote
I take it you don't mean trying ELO drivers instead?

no, no... i j ust thought maybe they had the same type of thing.

try calibrating "small" IE if you get a target in the top left, come towards the middle of the screen about 1 inch. if you get a target in the bottom right side.. again come towards the middle... see if it works (even slighly)

Logged

Kevin Mullins

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4504
  • Last login:February 01, 2021, 01:29:34 pm
    • Me on Myspace
Re: touch screen monitor
« Reply #10 on: April 30, 2010, 07:06:59 pm »
3M Control Panel -
Under  "Tools", click Advanced Options, Enable Manual Linearization.
A new tab with appear as "Controller..... click "Linearize".

This will start a much more detailed calibration process and accuracy test sequence.
Logged
Not a technician . . . . just a DIY'er.

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6181
  • Last login:Today at 04:25:29 pm
Re: touch screen monitor
« Reply #11 on: April 30, 2010, 07:20:09 pm »
someone mentioned ground earlier-this is very important
Logged
Pages: [1]
  
Go Up
« previous next »