Author Topic: Sanyo EZ20 doing the hula / Edit: Fixed!! (Read 1094 times)

Popcorrin · « **on:** December 10, 2008, 03:52:56 pm »

I just did a cap kit on my donkey kong monitor. It fixed the jailbar issue I was having but I noticed it's doing the "hula".
I saw on generic monitor flowchart that this might have something to do with the B+ voltage. I was going to try to adjust it but I don't know where it's at on this monitor and I thought I would check with a few of the resident experts before making things worse.

thanks

Popcorrin · « **Reply #1 on:** December 10, 2008, 06:59:56 pm »

I found an old post by Lutus that helped me fix the issue. He had the same issues and it turned out his B+ voltage was low. He even has a youtube video showing where the B+ adjustment was.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Sanyo EZ20 doing the hula / Edit: Fixed!! (Read 1094 times)

Popcorrin

Sanyo EZ20 doing the hula / Edit: Fixed!!

Popcorrin

Re: Sanyo EZ20 doing the hula Edit: fixed!