Author Topic: Component Video via 8800gtx question (Read 1558 times)

Epyx · « **on:** October 30, 2008, 03:41:58 pm »

I am running component via my 8800gtx (via 8pin component break out cable) on my Sony Wega 27". The picture is pretty darn good and definitely a notch up from the 4 pin S-Video on my older FX5200.

Question I have...in reading the many Component vs S-video threads etc is that many people state they don't see the boot screen/Windows logo when booting up over component...I am seeing these fine however and can definitely confirm that my Nvidia shows up as being connected via component 480i.

Any ideas?

richms · « **Reply #1 on:** October 31, 2008, 06:41:24 am »

Component via the monitor port and an adapter like some ATI cards supported wont boot. Now that all the tv outs have a scaler and still do 1080i and 720p there are not many that will do it on the vga/dvi port anymore

Epyx · « **Reply #2 on:** October 31, 2008, 10:48:43 am »

That makes sense. Thanks!


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Component Video via 8800gtx question (Read 1558 times)

Epyx

Component Video via 8800gtx question

richms

Re: Component Video via 8800gtx question

Epyx

Re: Component Video via 8800gtx question