Author Topic: Question about soft15kHz and connection to arcade monitor (Read 1007 times)

AE35 · « **on:** March 14, 2008, 01:17:46 pm »

Hey all!

In the near future I will be using soft15kHz so I can output 15kHz to my arcade monitor.

But I am puzzled by how to do this....the gfx card outputs in VGA(RGBHV) and arcademonitors use RGBS...how
I should I get HV-sync to single-lead sync?

Any advice is welcome! I need to get this working

Thanks,

Nicholas

ahofle · « **Reply #1 on:** March 14, 2008, 02:05:25 pm »

It's called "composite" sync. You would just tie together the H and V sync into the one sync wire that leads to your arcade monitor. Just make sure that's what your arcade monitor requires (some support composite and some support separate H and V sync).


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Question about soft15kHz and connection to arcade monitor (Read 1007 times)

AE35

Question about soft15kHz and connection to arcade monitor

ahofle

Re: Question about soft15kHz and connection to arcade monitor