Author Topic: WG 25K7193 - Arcing flyback (Read 1417 times)

DaveJ-UK · « **on:** July 30, 2007, 03:21:46 pm »

I've already replaced all the caps and fitted a new flyback to this monitor but after a few months the flyback has started arcing.

Is arcing from the flyback always caused by a crack in it? Is it safe just to fill it with hot melt or super glue, or should it always be replaced?

Here's a couple of pictures of what I believe to be the source of the arcing: (~600kb each, sorry dial up users)

http://www.davejuk.com/files/WG-25K7193-flyback01.JPG

http://www.davejuk.com/files/WG-25K7193-flyback02.JPG

http://www.davejuk.com/files/WG-25K7193-flyback03.JPG

As always, any advice is greatly appreciated.

grantspain · « **Reply #1 on:** July 30, 2007, 03:26:40 pm »

looks like that flyback has been physically damaged,i never mess with bodge repairs-i would replace it


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news