Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Isolation transformer  (Read 1798 times)

0 Members and 1 Guest are viewing this topic.

rfr341

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 116
  • Last login:May 24, 2017, 12:15:31 am
Isolation transformer
« on: March 30, 2007, 11:25:23 pm »
Hi, I have a nanao/sega 14" mc1400s monitor and need to get an isolation transformer for it. Would a standard 120 volt transformer work with it since I believe the monitor uses a 100 volts to work. If I am wrong on the monitor voltage please correct me. Also what should the minimum amps of the tranformer be. Thanks
Logged

Kevin Mullins

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4504
  • Last login:February 01, 2021, 01:29:34 pm
    • Me on Myspace
Re: Isolation transformer
« Reply #1 on: March 30, 2007, 11:34:12 pm »
Do NOT use a standard 120 volt isolation transformer !!
It will damage the chassis almost instantly.

You will need a stepdown isolation transformer to go from 120 down to 100.
Logged
Not a technician . . . . just a DIY'er.

segasonicfan

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 32
  • Last login:April 12, 2020, 02:34:26 am
Re: Isolation transformer
« Reply #2 on: April 06, 2007, 04:28:37 pm »
Hrmm...interesting.  Would the same go for Nanao monitors?  I have one that clearly shows 100v marked on the back of the tube...

-Segasonicfan
Logged

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: Isolation transformer
« Reply #3 on: April 06, 2007, 05:38:41 pm »
Yes, Nanao made monitors for Sega. Most Nanao and Nanao/Sega monitors operate on 100 volts AC and are usually marked "100 VOLTS".
Logged

rfr341

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 116
  • Last login:May 24, 2017, 12:15:31 am
Re: Isolation transformer
« Reply #4 on: April 06, 2007, 06:22:30 pm »
Ken do you happen to know where I could get a 100volt transformer for my monitor? Would a nintendo isolation transformer work with  a nanao chassis since it is 100 volts?
« Last Edit: April 06, 2007, 06:26:05 pm by rfr341 »
Logged

segasonicfan

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 32
  • Last login:April 12, 2020, 02:34:26 am
Re: Isolation transformer
« Reply #5 on: April 06, 2007, 07:25:08 pm »
Found the transformers:
http://www.smelectronics.com/japantrans.htm

It's a 100w step down but my Nanao is rated at 105w :/  That is maximum rating though so I think I may just take my chances...


-Segasonicfan
« Last Edit: April 08, 2007, 01:44:53 pm by segasonicfan »
Logged

MikeStl

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 7
  • Last login:April 14, 2007, 07:12:25 pm
Re: Isolation transformer
« Reply #6 on: April 12, 2007, 03:39:51 am »
Quote from: segasonicfan on April 06, 2007, 07:25:08 pm
Found the transformers:
http://www.smelectronics.com/japantrans.htm

It's a 100w step down but my Nanao is rated at 105w :/  That is maximum rating though so I think I may just take my chances...


-Segasonicfan

I wouldn't reccomend pushing it that close.  You really should look for an isolation transformer that has a 100v tap in it.  I found one listed here: http://quarterarcade.com/Game.aspx/4526?m=1
Logged
Pages: [1]
  
Go Up
« previous next »