Author Topic: pin-out to hook isolation transformer !! resolved !! (Read 2619 times)

northerngames · « **on:** February 12, 2007, 01:06:01 pm »

Hi I have a 25" WG monitor and it require's a isolation transformer and the set-up I have when it come's to the isolation transformer it appear's to be mounted on a old cherry master wood square with some old wire's fuse set-up and plug's and I was wondering if anyone know's a link to a pin-out where I can take the isolation transformer and hook it to the monitor and and put a new power cord on it and pehap's a inline fuse if there needed but I would like to elimate the non needed thing's and replace the old junky wire's with new but I have not toyed with these yet so i figured i would ask if anyone knew how to hook them up more directly and elimate the extra plug jack's and what not on the board.

tta583 · « **Reply #1 on:** February 12, 2007, 04:27:29 pm »

Try these:

http://www.therealbobroberts.net/mspac.html

http://www.therealbobroberts.net/basic-ac.gif

northerngames · « **Reply #2 on:** February 12, 2007, 05:59:39 pm »

Cool thank's that kinda helped elimate some thing's.

Is there a way to break it down even more?

I only need it to run the monitor only and nothing else.

SirPeale · « **Reply #3 on:** February 12, 2007, 06:54:04 pm »

Quote from: northerngames on February 12, 2007, 05:59:39 pm

Cool thank's that kinda helped elimate some thing's.

Is there a way to break it down even more?

I only need it to run the monitor only and nothing else.

It's not polar, so the outputs of the iso can just go to the blades of the outlet.

northerngames · « **Reply #4 on:** February 12, 2007, 07:49:10 pm »

so I can hook the power cord right to the iso and then the monitor right to the iso from the other side or am I still not getting it. I learn fast by being shown or hand's on but not a very good reading learner

Kevin Mullins · « **Reply #5 on:** February 12, 2007, 07:56:47 pm »

Yep... pretty much.

Should be two blades on the bottom and two on the top OR two on one side and two on the other.

Pick one pair for the power cord.
Use the other pair for the monitor.

I would still recommend having the fuse in there as well inline on one leg of the power cord.

northerngames · « **Reply #6 on:** February 12, 2007, 08:45:35 pm »

cool thank's guy's that is what I needed to know I wanted it straight wired only with what was needed and I will put the inline fuse in to be sure I was thinking of getting that in there anyhow just in case of a storm or something else silly lol

tta583 · « **Reply #7 on:** February 13, 2007, 01:19:47 pm »

Check the blades on the ISO. One side would (should) be marked as primary, the other secondary (or something similar: perhaps line and load).

Primary is the mains side..the power in. Secondary feeds the monitor.

SirPeale · « **Reply #8 on:** February 13, 2007, 07:24:12 pm »

Why should this be locked/deleted? Others may benefit from this.

northerngames · « **Reply #9 on:** February 13, 2007, 08:51:21 pm »

O sorry I am use to X-S bst rules and was not sure if I would get in trouble for making more then one open post and would rather be safe then sorry if it is o.k. to leave it open it is fine with me I just did not want to make any trouble here is all.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: pin-out to hook isolation transformer !! resolved !! (Read 2619 times)

northerngames

pin-out to hook isolation transformer !! resolved !!

tta583

Re: pin-out to hook isolation transformer direct to monitor and wall jack

northerngames

Re: pin-out to hook isolation transformer direct to monitor and wall jack

SirPeale

Re: pin-out to hook isolation transformer direct to monitor and wall jack

northerngames

Re: pin-out to hook isolation transformer direct to monitor and wall jack

Kevin Mullins

Re: pin-out to hook isolation transformer direct to monitor and wall jack

northerngames

Re: pin-out to hook isolation transformer direct to monitor and wall jack

tta583

Re: pin-out to hook isolation transformer!! resolved mod's close or delete please !!

SirPeale

Re: pin-out to hook isolation transformer!! resolved mod's close or delete pleas

northerngames

Re: pin-out to hook isolation transformer!! resolved mod's close or delete please !!