Green line across monitor

[myka316]

Well I plugged in my SF:II Hyper pcb today and powered it up in my cab containing a WG 25K2193 Monitor and all I got was a green line going straight across the screen.  I tried adjusting the position and such and it simply expanded ever so slightly.  Any idea as to what I am supposed to do?




Also, if anyone could find me a schematic/manual for the monitor it would be greatly appreciated.

[Ken Layton]

I have a repair guide for that model. There's a service kit you need to buy from Wells-Gardner's parts department to correct the "no vertical sweep" problem you have.

[myka316]

I have a repair guide for that model. There's a service kit you need to buy from Wells-Gardner's parts department to correct the "no vertical sweep" problem you have.

Hey Ken,

Would it be possible for me to contact you through PM/Email and possibly obtain that guide if it's in digital format?  Also, would you happen to know the service kit parts # that is needed?  I couldn't find my model listed under the site but I have heard that it either IS or is similar to the U2000 monitor.

Thanks for the help

[Ken Layton]

You can shoot me an email if you want the guide. It lists ALL the kits for the U2000. Your monitor is indeed a U2000 (2193).

[myka316]

Just shot you an email.

Thanks again for the help Ken.