Author Topic: 1st time Discharging Monitor...Do i have it right? (Read 1391 times)

mamerocks87 · « **on:** December 28, 2006, 06:46:37 pm »

Ok i am attempting to discharge my first monitor. I have a screw driver with an aligator clip to it wired to another alligator clip that is on the frame of the monitor. Do i simply tuck it under the anode? Is it ok if my chassis is not bolted down to my frame? It is just sitting on it. Take a look at my picture and tell me if i got this right. Thanks,

Ken Layton · « **Reply #1 on:** December 28, 2006, 07:12:29 pm »

Yes that will work. Just be sure the power to the monitor is unplugged.

mamerocks87 · « **Reply #2 on:** December 28, 2006, 08:39:22 pm »

Hurray! Thanks ken i just did it. Wasn't a big pop, very low pop. Im just glad to see my crappy jen shinn chassis leaving!


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: 1st time Discharging Monitor...Do i have it right? (Read 1391 times)

mamerocks87

1st time Discharging Monitor...Do i have it right?

Ken Layton

Re: 1st time Discharging Monitor...Do i have it right?

mamerocks87

Re: 1st time Discharging Monitor...Do i have it right?