Author Topic: Safe 800x600 parameters for Powerstrip-Arcade monitor (Read 1594 times)

MartyNg · « **on:** August 02, 2006, 07:46:35 am »

I've used the 640x480i(arcade) setting in powerstrip. I noticed there's also an 800x600, but it's not at 15KHz. How do I configure this to safely drive my 15KHz arcade monitor?

wpcmame · « **Reply #1 on:** August 06, 2006, 03:20:08 pm »

Use lrmc (http://sourceforge.net/projects/lrmc)

lrmc 800 600 48 -i

shows
# 800x600x48.00 @ 15.624kHz
Modeline "800x600x24.00" 14.499072 800 824 920 928 600 610 614 651 -HSyn
c -VSync interlace

which can easily be converted to the powerstrip format.

(I hope you know that you will not see 600 lines on your monitor unless you change the vertical size setting)


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Safe 800x600 parameters for Powerstrip-Arcade monitor (Read 1594 times)

MartyNg

Safe 800x600 parameters for Powerstrip-Arcade monitor

wpcmame

Re: Safe 800x600 parameters for Powerstrip-Arcade monitor