Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Mario Bros themed MAME Cabinet: Complete!  (Read 2892 times)

0 Members and 1 Guest are viewing this topic.

bleemus

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 184
  • Last login:September 01, 2016, 12:53:24 pm
  • Party Pengo in the house.
Mario Bros themed MAME Cabinet: Complete!
« on: July 30, 2006, 12:03:43 am »
Never have posted about this cab before, but it is 99% done.  Only a wireless network card and possibly a bezel.  You can't see the monitor or behind it with the smoked plexi with normal eyes, the flash just brings out that stuff.

If you are interested at all about all the steps on this cab, you can go to my MSN Space.

My first cab, with another one to start soon!
« Last Edit: July 30, 2006, 12:27:06 pm by bleemus »
Reality is overrated.

arcadefever

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 795
  • Last login:June 03, 2009, 09:45:05 pm
  • Miami Beach Florida
Re: Mario Cabinet Complete!
« Reply #1 on: July 30, 2006, 02:07:27 am »
very nice ...

what are the 2 buttons for in the middle ?

bleemus

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 184
  • Last login:September 01, 2016, 12:53:24 pm
  • Party Pengo in the house.
Re: Mario Cabinet Complete!
« Reply #2 on: July 30, 2006, 02:14:57 am »
red == quit
black == pause
Reality is overrated.

arcadefever

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 795
  • Last login:June 03, 2009, 09:45:05 pm
  • Miami Beach Florida
Re: Mario Cabinet Complete!
« Reply #3 on: July 30, 2006, 02:21:54 am »
i see....

are you going to include the original mario bezel ? (will look great IMO)

well congrats ... very nice cab  :cheers:

leapinlew

  • Some questionable things going on in this room with cheetos
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7919
  • Last login:June 29, 2025, 08:37:44 pm
Re: Mario Cabinet Complete!
« Reply #4 on: July 30, 2006, 03:23:32 am »
Looks great! The colors are matched up pretty good.

How does it play?

bleemus

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 184
  • Last login:September 01, 2016, 12:53:24 pm
  • Party Pengo in the house.
Re: Mario Cabinet Complete!
« Reply #5 on: July 30, 2006, 10:50:48 am »
are you going to include the original mario bezel ? (will look great IMO)

I wish I could.  I put a hugeass Dell 21 inch monitor in there... so it is about the same size, but it sits up really close to the plexi.  I fear that if I put the bezel on there, you would have to crouch down to view the screen, and some of the screen might even be cut off.  I'm 5'11", and when I look at it while playing, i can just see the top of the screen, so I'm pretty sure the bezel would block it.  Wish I could though, it would look alot better with it.

How does it play?

I have no complaints so far.  The Happ 360s are really smooth, although the springs are creaking around a little bit, I'm sure that will stop once they are worn in a bit.  Still would like a slightly bigger diagonal on them, I need to find someone with access to a lathe in the STL area that I can use to chop down the extra actuators I bought.
Reality is overrated.

arcadefever

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 795
  • Last login:June 03, 2009, 09:45:05 pm
  • Miami Beach Florida
Re: Mario Bros themed MAME Cabinet: Complete!
« Reply #6 on: July 30, 2006, 08:27:28 pm »
you can have it done here :

http://www.classicarcadegrafix.com/sunshop/index.php?action=search

and for $5 extra it can be self adhesive  :)

no need to touch the monitor...

bleemus

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 184
  • Last login:September 01, 2016, 12:53:24 pm
  • Party Pengo in the house.
Re: Mario Bros themed MAME Cabinet: Complete!
« Reply #7 on: September 22, 2006, 10:26:57 pm »
I was having issues with cooling; I even had a video card burn up it was getting so warm in there. (is was just a GeForce 1, so no huge loss)

So, I bought some 120mm fans that have a hardware temperature control.  I mounted the fans on the cab back piece I made as to not have to violate the cab itself.

I mounted one on the bottom as an intake fan.  It seems to be bringing in air well, since it is pushing out the top vents on the back quite.  We'll hope I don't have to mount a second one on top to blow out/in.

I screwed some wood on the back to come up flush to the back of the fan, then cut up some PC expansion slot covers to use for "mounting brackets".

It may not be pretty, but it works!

Front of the back:


Back of the back:
Reality is overrated.

Space Fractal

  • Wiki Master
  • Trade Count: (+1)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 1888
  • Last login:September 26, 2023, 11:32:13 am
  • Space Fractal
    • Space Fractal
Re: Mario Cabinet Complete!
« Reply #8 on: September 23, 2006, 12:48:03 pm »
red == quit
black == pause

The place seen, you may came to hit the quit button, when you dosent should have do. So it would been better let BOTH bottons hit down simulations to quit mame (like I do on my cab).

Nice cab even.
Decade Old Work: MultiFE, ArcadeMusicBox
Today Works: Various Spectrum Next games from Rusty Pixels and html5 games.