Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Artwork on Aluminium Panels  (Read 1223 times)

0 Members and 1 Guest are viewing this topic.

chablis97

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 77
  • Last login:August 17, 2005, 04:30:02 am
  • I'm a llama!
Artwork on Aluminium Panels
« on: April 13, 2005, 04:57:53 am »
I'm just starting to renovate an old cocktail cabinet with an aluminum control panel.  The original art is in very poor shape and what remains comes off very easily. See below

Any tips on how to put new art onto the aluminium?, or should I just spray black?


Logged

redcoats

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 163
  • Last login:March 15, 2015, 04:04:56 pm
  • I want to build my own arcade controls!
Re: Artwork on Aluminium Panels
« Reply #1 on: April 13, 2005, 07:05:16 am »
Quote from: chablis97 on April 13, 2005, 04:57:53 am
I'm just starting to renovate an old cocktail cabinet with an aluminum control panel.
Logged

spriggy

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 567
  • Last login:January 28, 2024, 09:45:27 pm
Re: Artwork on Aluminium Panels
« Reply #2 on: April 13, 2005, 09:36:08 am »
Curious.  Whats the panel like on the other side?  If high dpi pics were taken of both panels, could you roughly construct the full artwork?

With some decent pics of this simplistic artwork and accurate dimensions of the control panel, I'd have a look at replicating it for you(vector trace) so as you can produce new overlays .

That is if you want to restore the cabinet back to what it was!?
Logged
"Once a Knight, always a Knight.   Twice a night.. and your doing alright!!" ::)

chablis97

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 77
  • Last login:August 17, 2005, 04:30:02 am
  • I'm a llama!
Re: Artwork on Aluminium Panels
« Reply #3 on: April 13, 2005, 09:40:31 pm »
I was thinking the same way spriggy.  I've done a bit of vector graphics work before, not much though, so any help would be appriciated.  The artwork on the other side is a little better (becuase its Player 2).  I'll put up some pics.
Logged
Pages: [1]
  
Go Up
« previous next »