Author Topic: Crazy Canadians Custom cocktail: DONE! and Web Site (Read 14360 times)

Quarters · « **on:** November 16, 2004, 09:55:55 pm »

Hello All.

This weekend I made my first cuts on my first cab. This forum has taught me much. I hope someone can learn something from this thread, even if it's only what *not* to do.

Watch this space for further updates.

pics lost in the forum upgrade, reattached:

Quarters · « **Reply #1 on:** November 16, 2004, 09:57:14 pm »

next pic

Witchboard · « **Reply #2 on:** November 16, 2004, 10:28:01 pm »

That's crazy! You must be Canadian. Oh, anyway, you really got that coin door on the floor. Hey, that rhymed.

Quarters · « **Reply #3 on:** November 25, 2004, 10:20:34 pm »

I got a good start on the control panals. The front edges still need to be rounded.
All but one joystick will be 4 way/8 way Omni-Stik Prodigy Retro editions, the other will be the TopFire edition. The TopFire and Oscar Vortex make one side for Tron

Quarters · « **Reply #4 on:** November 25, 2004, 10:28:25 pm »

Witchboard,

When Control panels lay upon each side,
Down low the coin door will not hide

ok, I promise - No more verse

armax · « **Reply #5 on:** November 28, 2004, 07:55:59 pm »

Are you using four control panels for your cocktail cab?

Quarters · « **Reply #6 on:** November 28, 2004, 08:27:34 pm »

Quote from: armax on November 28, 2004, 07:55:59 pm

Are you using four control panels for your cocktail cab?

You bet.

My glass is in! I will be cutting the top tomorrow

Quarters · « **Reply #7 on:** December 08, 2004, 11:00:44 pm »

It's beginning to look like a cocktail.

I ordered a Slickstick Tornado Spinner instead of the Oscar Vortex. The Vortex would not have fit in the planned space.

Opinions please:
All the oak will be stained a slightly darker shade. There will be black t-molding in all the obvious places. All the controls will be black or white. Should I paint the top black, or should I leave the wood grain showing and just make a black bezel?

Zakk · « **Reply #8 on:** December 09, 2004, 08:15:01 pm »

That looks great!

Personally I'd stain the wood fairly dark and go with the black top (or custom artwork). However, I have never been a fan of light woodgrain cabinets, so take that advice with a grain of salt

javeryh · « **Reply #9 on:** December 16, 2004, 02:13:53 pm »

Quote from: Zakk on December 09, 2004, 08:15:01 pm

That looks great!

Personally I'd stain the wood fairly dark and go with the black top (or custom artwork).

menace · « **Reply #10 on:** December 16, 2004, 02:25:13 pm »

I third that (neat looking table by the way). I used dark cherry stain to refurb the astro fighter cocktail I picked up--i really like the color--although it looks slightly different depending on what wood it goes onto.

SirPoonga · « **Reply #11 on:** December 17, 2004, 01:25:38 pm »

Do you have pics of the inside, how you mounted the monitor, etc...

MameMaster! · « **Reply #12 on:** December 17, 2004, 02:08:24 pm »

Quote from: Quarters on December 08, 2004, 11:00:44 pm

It's beginning to look like a cocktail.

Grasshopper · « **Reply #13 on:** December 18, 2004, 07:22:05 am »

It's shaping up to be one of the best cocktails I've seen.

I particularly like the fact that you've fitted 4 control panels. I can't understand why more people don't do this.

A lot of tables I've seen recently have only 3 panels which looks unbalanced IMHO.

Quarters · « **Reply #14 on:** December 18, 2004, 10:44:04 am »

Hi. Thank you for all the kind words.

As you can see I chose a darkish stain and got my t-molding installed. The stain will match well with the glass of Guinness that will often sit on it

I had a hard time deciding between a black top or wood grain. I stained the top and am happy with the result. It can always be painted later. This cab is strictly the furniture look. My next one will be an upright with sideart, marquee and lots of primary colors. My next one after that... Well let's just say I will be seeing you lot around for a while

I am going to attempt to make my own bezel and have been looking for a source of cheap back plastic. I think I found just the thing! Any crazy Canadian should have thought of it long ago. I bought a black Crazy Carpet for 79 cents (that's about 50 cents US). For those who live in more moderate climates a Crazy Carpet is a sheet of flexible plastic that you sit on and slide down snow covered hills, a very effective method of filling ones pants with snow. I'll let you know how it turns out.

Quarters · « **Reply #15 on:** December 18, 2004, 11:07:25 am »

Quote from: SirPoonga on December 17, 2004, 01:25:38 pm

Do you have pics of the inside, how you mounted the monitor, etc...

mounting the monitor was a bit of hit and miss. I built a shelf then shimmed and blocked until it was level and would not move. All the computer bits, encoders etc. will live in the drawer pictured below.

RayB · « **Reply #16 on:** December 18, 2004, 02:38:26 pm »

nice work! I'd recommend the monitor bezel be Black as a finishing touch.

whammoed · « **Reply #17 on:** December 18, 2004, 09:00:25 pm »

Cool design. Way to break out of the mold for a cocktail. The top looks like a piece to a puzzle.

How did you mount the trackball in wood without a mounting plate? 4 panels gives you lots of room to put controls. Only drawback is you can't put it up against a wall, eh?

ras2a · « **Reply #18 on:** December 19, 2004, 05:24:34 am »

Quarters, that is simply beautiful my friend. Major kudos to you!

Craig

Gunstar Hero · « **Reply #19 on:** December 19, 2004, 09:18:45 pm »

N I C E .

Beautiful curves.

shafor · « **Reply #20 on:** December 20, 2004, 10:23:54 am »

Could you please share the dimensions on your project with the rest of the board?

Thanks

mozzer · « **Reply #21 on:** December 20, 2004, 11:18:53 am »

Love those corners!

Nice craftsmanship

Quarters · « **Reply #22 on:** December 20, 2004, 02:08:37 pm »

Quote from: shafor on December 20, 2004, 10:23:54 am

Could you please share the dimensions on your project with the rest of the board?

Thanks

Yes. In fact I will probably make a web site documenting the whole process. I have a lot more pics and all my plans are in CorelDraw files. This will have to wait until I can free myself from the mess of wires I'm currently tangled in. I may also play a game or two first.

Quote from: whammoed on December 18, 2004, 09:00:25 pm

How did you mount the trackball in wood without a mounting plate?

That was not too hard. I used a 2 1/2" hole saw through the cp, routed the cp from the bottom to about 1/4 ", and chopped the tops off the posts meant to secure the trackball assembly to the mounting plate. I also had to use a slanted router bit to angle the 2 1/2" hole. I secured the hole thing to the cp with wood screws. see pics below.

Quarters · « **Reply #23 on:** March 06, 2005, 11:03:28 am »

Finally Done!

Quarters · « **Reply #24 on:** March 06, 2005, 11:05:21 am »

More pics.

chopps · « **Reply #25 on:** March 06, 2005, 11:13:31 am »

wOw!! great job!

your project reaaaallly makes me want to build a cocktail!

mahuti · « **Reply #26 on:** March 06, 2005, 12:58:28 pm »

That's fantastic. Really has a modern feel with throwback styling. Great effort.

vibez · « **Reply #27 on:** March 06, 2005, 02:18:35 pm »

really beautiful!!! Congrats on a well made project

armax · « **Reply #28 on:** March 06, 2005, 04:53:13 pm »

I noticed you had it up against the wall making one of the CP useless until moved. I thought when I first read about the project that it would take up a pretty large footprint (I thought about doing the same thing). I have to admit, it's a very nice cab.

Quarters · « **Reply #29 on:** March 06, 2005, 05:37:28 pm »

Quote from: armax on March 06, 2005, 04:53:13 pm

I noticed you had it up against the wall making one of the CP useless until moved. I thought when I first read about the project that it would take up a pretty large footprint (I thought about doing the same thing). I have to admit, it's a very nice cab.

Yes. If You put 4 chairs around it it would take up a lot of room. I hope to be moving into a house come late spring or summer. I've told my wife this is conditional on me getting a game room.

Knievel · « **Reply #30 on:** March 06, 2005, 05:54:03 pm »

Nice job eh, very cool design...must be very sturdy as well.
I think a black top and maybe even smoked glass would better compliment all that oak, just my 2 cents though.

GGKoul · « **Reply #31 on:** March 07, 2005, 11:51:11 am »

WOW!! That looks great...

I need measurements!!!

bowza · « **Reply #32 on:** March 07, 2005, 12:33:34 pm »

I like that a lot.

Are you a carpenter by trade?

Have u installed any casters to help move it away from walls or rotate.

Again nice wood.

Bowza

Mojo2000 · « **Reply #33 on:** March 20, 2005, 05:10:04 pm »

Honestly, I did not mind at all the original, light, unstained/unpainted look.

I mean, come on - who hasn't seen black laminate or wood stain on a cocktail cabinet?

Santoro · « **Reply #34 on:** March 20, 2005, 08:40:15 pm »

I love the design as well. Really sharp.

Good work!

rchadd · « **Reply #35 on:** March 21, 2005, 10:02:39 am »

nice!

Silhouette · « **Reply #36 on:** March 21, 2005, 11:03:40 am »

Now THAT is a cabinet with class.

tommy · « **Reply #37 on:** March 21, 2005, 12:11:03 pm »

A+ i would keep the glass clear i wouldnt want to cover your wood stain , and darker glass would hide it some. looks very well made.

javeryh · « **Reply #38 on:** March 21, 2005, 05:59:20 pm »

How does it work for playing fighters on the longer CP? I'm planning on doing the same thing but I also want it to be comfortable to play at...

LordKaosNY · « **Reply #39 on:** March 22, 2005, 12:24:17 pm »

This cabinet should be nominated for the HOF for its sheer simplicity. I'm sure we all would like to know what the measurements are or what plans you used. This one is for everyone: Do you think a Ms. Pacman cocktail top would fit instead of the one pictured?


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Crazy Canadians Custom cocktail: DONE! and Web Site (Read 14360 times)

tommy